UPC 029882754085

• RADIATORS ARRIVE IN METALLIC GREY FINISH, THEY ARE ***NOT WHITE***
• THEY ARE READY-TO-PAINT AND REQUIRE ASSEMBLY, INSTRUCTIONS ARE INCLUDED
• ALL IMAGES ARE FOR STYLE REFERENCE ONLY AND ACTUAL SIZE & SHAPE MAY VARY
• ALWAYS ADD A MINIMUM OF 1" - 2" WHEN CALCULATING YOUR SIZE REQUIREMENTS & INCLUDE ALL VALVES & PIPES (COVER TOPS ARE APPROX. 1" LARGER TO FIT ALL SIDES)
• TWO LAYER ZIN-COTE STEEL ELIMINATES RUST, REMOVABLE TOP & DESIGNER FRONT GRILLE

Whites Radiator Cover - This enclosure is 24 inches wide by 28 inches in height and 10 inches in depth. The width of the units must be 1 inch or more beyond the radiator including the pipes and valves attached. All 3 measurements must be greater than the radiator and all the valves and pipes attached to it in order to fit around it. A radiator that is left exposed, allows the heat to travel quickly toward the ceiling, causing the main zone of the room to maintain a lower temperature. Whites radiator enclosures have a specially designed front grille. The grille provides efficient heating by redirecting warm heat into the living area of a room, rather than causing the warm air to rise rapidly to the ceiling directly above the radiator. Custom sizes are available please contact us for more information. Radiator enclosures are manufactured from a zinc-impregnated steel, and is ready-to-paint. Using a semi-gloss or gloss paint (rather than a flat paint) is recommended for ease of cleaning. Paint can be rolled, sprayed or brushed, though brushing can tend to leave brush marks if you're not careful. Krylon brand Semi-Gloss spray paint produces a very good finish. Many of our customers have also utilized creative painting techniques, such as wood graining, stenciling and faux finishing with breathtaking results. Some assembly is required. Each radiator cover is shipped knocked-down and individually packaged, both to keep shipping costs low, as well as for ease of transport to your home. Once they are unpacked, they are easily assembled with eight (8) included screws. First, the sides are each screwed to the front panel, and then the partial back panel is screwed in place. Lastly, the top of the radiator cover is placed on the enclosure. Detailed instructions and pictures are included with each radiator enclosure. If you have any questions feel free to contact us toll-free at 1-800-231-6114.