UPC 036577468424

• 2 Oregon "Skip Sequence" 72JGX091G Chains, 91 Links (for 28" Bar) 3/8" Pitch, 50 Gauge
• X grind-enhanced grind geometry significantly improves out-of-box sharpness with substantial speed improvement in boring and bias (undercut) modes
• Blued cutters provide superior corrosion resistance, clean ground gullets increase chip flow and evacuation.
• Offset ramp-shaped depth gauges reduce roughness, helps prevent cutter from diving into the sidewall of the cut.
• Warning: oregon 72, 73, and 75jgx super guard chains may be capable of kickback that could result in serious injury to the saw operator or bystanders.

72JGX is the skiptooth version of 72LGX. Can be used to replace 33RSF91 if ship sequence is desired. This chain (skip) is very popular on bars 24" and longer. Round chisel cutters work well in both softwoods and hardwoods. 72JGX works best in clean cutting conditions, where there is limited contact with dirt and other abrasive materials. Fits the following: Stihl: 024, 026, 028, 029, 030, 031, 032, 034, 036, 038, 039, 040, 041, 042, 044, 045, 046, 048, 056, 064, 066, E 15 Electric, E 20 Electric, E 220 Electric, MS 260, MS 261, MS 270, MS 271, MS 280, MS 290, MS 291, MS 310, MS 311, MS 340, MS 341, MS 360, MS 361, MS 362, MS 380, MS 390, MS 391, MS 440, MS 441, MS 460, MS 460 R, MS 461, MS 640, MS 650, MS 660, MS 661, MSE 220 Electric