UPC 045996997200

• Flutes and cutting points on both ends allow for bit to be turned around when one end becomes worn
• Short length drill bit offers rigidity to reduce tool deflection and breakage
• High-speed steel (HSS) provides hardness for wear resistance
• Black oxide finish reduces wear while promoting chip and coolant flow
• 118-degree conventional point for general-purpose drilling applications

The Drillco 330 series double-ended short length drill bit is made from high-speed steel with a black oxide finish and has a 118-degree conventional point with flutes and cutting points on both ends to allow for the bit to be turned around when one end becomes worn. This short length drill bit provides rigidity and strength to reduce tool deflection and breakage. High-speed steel (HSS) provides hardness for wear resistance, and the black oxide finish reduces wear while promoting chip and coolant flow. The round shank accommodates most drill chucks. The drill bit conforms to American National Standards Institute (ANSI) specifications.

Drill bits are cutting tools used to make holes in a range of materials using machines such as handheld portable drills, machining centers, and lathes. Drill bits come in a variety of lengths and types, the most common of which is the twist drill bit. The round, twisted shaft of the twist drill bit typically has two cutting edges and flutes. The helical twist of the flutes brings chips up and away from the cutting edges and allows for coolant to reach the cutting edges. Jobber length twist drill bits, the most common length of twist drill bit, offer a good compromise of length and reach for the widest range of materials and applications. Mechanic's length twist drill bits (also called maintenance length) are a little shorter than jobber length and less prone to deflection when drilling. Short length twist drill bits (also called stub or screw-machine length) are the shortest and stiffest twist drill bits, helping to reduce the chance of deflection or breakage when drilling. Reduced shank twist drill bits (also called Silver and Deming drill bits) have a shank that is smaller in diameter than its shaft, permitting drilling machines with a 1/4", 1/2", or 3/4" drill chuck to create large holes. Long length twist drill bits (also called taper length) are a little longer than jobber length, allowing for deeper holes and longer reach. Extra-long length twist drill bits (also called extension) are longer than long length twist drill bits for greater reach or for drilling deeper holes.

Drillco manufactures cutting tools such as drill bits, reamers, taps, dies, annular cutters, end mills, and burs. The company, founded in 1978, is headquartered in Baton Rouge, LA.