UPC 095969348256

• Power quality recorder for analysis of utility and industrial power distribution systems in medium and low-voltage networks
• Continuous recording of voltage, current, power (real, reactive, and complex power), power factor, kilowatt hours, flicker, unbalance, frequency, harmonics, harmonic distortion, mains signaling, and (optional) fast transient analysis
• Included software provides trend diagrams for root-cause analysis, statistical summaries, reports, and real-time data monitoring
• 2 GB data memory allows simultaneous recording of numerous power parameters
• Complies with IEC 61000-4-30 Class-A standard

The Fluke 1760 3-Phase Power Quality Recorder is a power quality recorder for analyzing utility and industrial power distribution systems in medium and low-voltage networks. Applications include performing detailed disturbance analysis, validating incoming power quality at the service entrance, determining where a fault occurs, assessing baseline power quality, and studying power load. The recorder allows continuous recording of voltage, current, power (real, reactive, and complex power), power factor, kilowatt hours, flicker, unbalance, frequency, harmonics, harmonic distortion, mains signaling, and (in Fluke 1760 TR US and Fluke 1760 TR BASIC) fast transient analysis up to 10 MHz. It has eight input channels: four voltages and four currents, or eight voltages. It has a 2 GB data memory for simultaneous recording of numerous power parameters and comes with an Ethernet cable for network connection and with a crosslink Ethernet cable for direct PC connection. Included software provides trend diagrams for root-cause analysis, statistical summaries, reports, and real-time data monitoring. GPS time synchronization (in Fluke 1760 and Fluke 1760TR) allows quick detection of where a fault first occurred, either inside or outside the facility. For detailed specifications and measurements, refer to the Fluke 1760 datasheet.

The recorder is available either with or without current probes. It complies with Electrotechnical Commission (IEC) 61000-4-30 Class-A standard and, for the basic unit, with European Union (EN) 61010-1 2nd edition 300V Category III. Industrial power meters are commonly used to test and evaluate power systems.

SpecificationsNumber of inputs8 galvanically isolated inputs for voltage and current measurementsNominal voltage (rms)100 mVRange (peak value)280 mVSignal conditioning: Range for 50 Hz systems50 Hz + or - 15 % (42.5 Hz to 57.5 Hz)Signal conditioning: Range for 60 Hz systems60 Hz + or - 15 % (51 Hz to 69 Hz)Weight4.9 kg / 10.8 lbs. (without accessories)Dimensions*325 x 300 x 65 mm / 2.8 x 11.8 x 2.6 inches (H x W x D)

*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Industrial power meters measure electrical properties such as voltage, current, power, and energy to monitor the efficiency and performance of a power system. They are used for designing, installing, and maintaining industrial, commercial, and residential power supply systems. More advanced models have features for comparing and recording multiple measurements taken at different times and in different areas.

Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.

What's in the Box?

• Power Quality Recorder with 2 GB internal Flash memory
• PQ Analyze software on CD-ROM
• Ethernet cable
• Crosslink Ethernet cable
• Mains cable
• Carrying bag
• (4) Voltage probe 1000V with two Dolphin clips (in Fluke 1760 and Fluke 1760TR)
• (4) Flexible current probe 1000 A/200 A
AC (in Fluke 1760 and Fluke 1760TR)
• GPS time sync receiver (in Fluke 1760 and Fluke 1760TR)
• Instructions