UPC 190021004115

• Supports Cameras up to 8 Pounds; Precision of Control: ±0.02°
• Transmitter for Remote Pan/Tilt Control; Tool-Less Balance Adjustment System
• Assistant Software for iOS and Windows; Bluetooth Wireless Interface for Setup
• Silent Mode For Quiet Operation; USB and PowerTap Power Outputs
• Includes: Ronin-M Transmitter - 2 DJI Intelligent Batteries - Battery Charger - Handle Bar - Turning Stand - Cable Pack - Micro-USB Cable - Camera Mounting Plate - 8 Camera Screws - Lens Support Screw - Lens Support - 3 Allen Wrenches

The Ronin-M 3-Axis Handheld Gimbal Stabilizer from DJI is a camera stabilization system designed to give the operator close to the freedom of unencumbered handheld shooting but without the hand-shake. Suitable for most camera types and configurations up to 8 pounds, the Ronin-M uses brushless motors that work on three axes: one for side-to-side "roll" - keeping the horizon level - one for tilt, and one for pan. The system is computer-controlled and features a tilt range of 105? up / 165? down plus a roll range of ±110?. Furthermore, the system boasts a precision of control of ±0.02°, enabling precise camera moves and stability correction against even very fine movements. In addition to handheld shooting, the gimbal can be used in vehicle mounting scenarios and other contexts where vibrations or other abrupt movements would make tripods and rigid camera support systems unsuitable. The Ronin-M supports dual-operator shooting, much like working with a jib that has a motorized pan/tilt head. In this mode, a second operator would use the included transmitter (radio controller) to manually control camera pan and tilt independently of which way the Ronin-M itself moves. The included transmitter/receiver system operates on 2.4 GHz and is proprietary. If you prefer to use a third-party transmitter there is a D-Bus port on the Ronin-M to install your own receiver. This DJI Ronin-M 3-Axis Accessory Kit Includes: Ronin-M Transmitter (Controller) 2 DJI Intelligent Batteries for Ronin-M (1580mAh) Battery Charger Handle Bar Turning Stand Cable Pack Micro-USB Cable Camera Mounting Plate 2 x Camera Screw A (1/4"-20) 2 x Camera Screw B (3/8"-16) 2 x Camera Screw C (1/4"-20) 2 x Camera Screw D (3/8"-16) Lens Support Screw Lens Support 3 x Allen Wrenches