UPC 190033410232

• 1. Suitable for most drone ------ the mini 20x20mm F3 EVO AIO Flight Controller can be used for 60mm-250mm drone frame kit, especially for 130mm 120 110mm 90mm 80mm, mini size, light weight,providing functions you need without much burben.
• 2. Mini 20MM (M2 hole) Flight Controller Board ------ MPU: MPU6000. CPU: STM32F3CCT6 Flash 256K. Built-in RC/LC filter,Support CF, BF firmware (PIKOBLX).Built-in 5V 3A output BEC.Support 2-6S power input.Support Subs/PPM/DSMX receiver.Buzzer / programming LED / voltage monitoring / BLHELI ESC programming
• 3. 25A( Max 30A,10S) 2-4S Blheli_S 4 in 1 ESC ------ Processor: SILABS EFM8BB2 48MHZ. MOS tube: TPN2R703NL. Firmware: BLheli_S 16.5. Support 2-4S Lipo battery. Constant Current: 25A , Peak Current: 30A (10S)
• 4. DSHOT6000 Version 6DOF F325 EVO Flight Controller Board ------ Support Damped Mode, Oneshot125/42, multishot, Dshot150, Dshot300, Dshot600, forward and reverse. One Tower Weight: 6.5g. Size : 4 IN 1 ESC 27x27mm (main board),31x31mm ( including pad),FC Board (23x23mm board, 20mm mounting holes (M2) )
• 5. Note: This FPF3 EVO Flight Control Board is D-Shot Version. It was flashed BF3.15 firmare and set CLI Order of replacing S1-S4; S4-S6. So, if you want to flash the latest BF Firmware, you just need input the following Order to the CLI Order Site in BF Ground. Then, save and reset. Same firmware, don't need reset. Our photos also show that this, pls check it. Thank you !

V2 Flytower F3 evo + 4IN1 XR25A ESC Indoor Micro Flight Control PBF3 EVO Mini Flight Control Flight Controller Board 1. Equipped with MPU6000 PB f3 evo acceleration response faster; PBF3 EVO integrated 5V / 3A BEC, PDB distribution board. (This version is 6DOF, no barometer and electronic compass) 2. Specifically designed for small-scale through the machine to adapt to the following specifications within the size of 280mm rack, especially within the 130mm rack can play a small and functional full advantage; 3. This board provides all the functions, weighs only 2.3g, the size of only 23 * 23MM, fixed hole for the 20MM (M2 hole); 4. For four-axis models tailored, built-in RC / LC filter, support CF, BF firmware (PIKOBLX); 5. Using STM32F3CCT6 single-chip 256K flash memory, MPU6000 sensor SPI interface connection, faster computing speed; 6. Support 2-6S power input; 7. Built-in 5V 3A output BEC; 8. Support SBUS / PPM / DSMX and other mainstream mainstream receiver; 9. Buzzer / programming LED / voltage monitoring / BLHELI ESC programming; 4 IN 1 XR25A 396 cross racing BLHELI-S ESC 1. Input voltage: 2-6S LiPo Battery 2. BEC output: none 3. Single continuous current operating current: 25A (maximum current: 35A 10 seconds) 4. Four in one electrical size: 27 * 27mm (motherboard size) / 31*3.15mm (including the maximum size of the pad and the protruding point) 5. Four in one electric transfer weight: 4.2g 6. Firmware: BLHELI-S 7. Support Damped mode, Oneshot125, positive and negative 8. Processor: SILABS C8051F396 50MHZ 9.MOS tube: TPN2R703NL 10. Drive: a new generation of triple-MOS drive Package list: 1x PBF3 EVO 6Dof Flight Control Board AIO PDB BEC 1x 25A Blheli_S 4 in 1 ESC