UPC 192684491493
Barcode for 4pcs 186 50 Battery Charger Protection Module, Power Bank PCB Module Board, Dual USB 5V 1A 2.1A with BMS Protection for Phone DIY Mobile Power Bank
Scannable Barcode for UPC 192684491493
Sellers
| Marketplace | Price | Updated |
|---|---|---|
| $13.99 | 08/03/2021 14:41:45 GMT - Details |
Recently Searched
UPC 703063952377
TOPENS AT1202 Automatic Gate Opener Kit Heavy Duty Dual Gate Operator for Dual Swing Gates Up to 18 Feet or 880 Pounds Gate Motor AC Powered
Best Price: $469.00
View Product
UPC 617407628722
Patriot P30 Dual Purpose Electric Fence Energizer, 3.0 Joule
Best Price: $186.00
View Product
Attributes
| Attribute | Value |
|---|---|
| Binding | Electronics |
| Brand | MakerFocus |
| EAN | 0192684491493 |
| Manufacturer | MakerFocus |
| Model | 8541549477 |
| MPN | 11M58Y46PRX18ROU |
| UPC | 192684491493 |
Description
- Designed for 186 50 battery DIY power bank: The battery of the 186 50 battery must be flat, and the length is 65MM. The pointed battery cannot be used. If you are using old batteries, different capacities, different brands are not available, the assembled battery is guaranteed to be at least 3.5V per voltage. If the voltage is too low, it will not be charged. .
- Supported connection methods: It is possible to connect only one lithium battery or multiple lithium batteries in parallel. The capacity of connected battery is no more than 200, 000 mA, As long as the battery with a voltage of 3.0-4.2V can be used.
- Charge indication of this power bank pcb board: The word "IN" will be shown in the display; Output indication: Long press the LED button after turning on the load, Start output, The word "OUT" and the current and voltage of 5.0V1.0A or 5.0V2.1A will be displayed in the display.
- This is a mobile powerbank module with Protection Function: The protection circuit of the boosted lithium battery has been integrated, prevent over-discharge, over-charge, overload short circuit protection, over current protection, and over temperature protection. Note: The positive pole of the battery is connected to B+ and the negative pole is connected to B- do not reverse it. If it is reversed, it will burn out!
- Why can't continue charging when charging capacity is 99 ? You just assembled the battery, why the display percentage is not accurate, the battery power is only 50 , but it shows 80 after assembly? --Whether you are using a new battery or an old one all need to be discharged before use, then turn it off charge it once gain. If it still cannot be solved, it is caused by large internal resistance and inconsistent capacity.
Price Disclaimer
Product prices are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on amazon.com, amazonsupply.com, or myhabit.com at the time of purchase will apply to the purchase of this product.