UPC 520361367487

• Digital clamp-meter for 24V loop circuits measures DC to 100mA via clamp and to 24mA in circuit, and DC voltage to 30V
• Meter can source and simulate DC signals from 4 to 20mA, can source DC voltage signals up to 10V, and is accurate to 0.2% with a resolution of 0.01mA
• Clamp with 4.5mm (0.177 inches) jaw opening measures current without touching or interrupting the circuit, and is for use in hard-to-reach applications
• Built-in 24V loop power supply to power a transmitter and measure its milliamp output signal
• Meets EN and IEC safety standards 61010-1 and 61010-2-032
• Dual backlit display with both mA measurement and percent of 4 to 20 mA span
• Measurement spotlight
• Measure up to 99.9 mA range non-contact
• Automatic power off
• 4 to 20 mA scaled output

The Fluke milliamp process Digital clamp-meter is a manual-ranging meter for measuring DC milliampere (MA) and DC Voltage output signals of 24V loop circuits. It has a clamp that measures DC to 100MA. The clamp has two jaws that can close around an electrical conductor up to 4.5mm (0.177 inches) in diameter to measure current without touching or Interrupting the circuit, and has a 1 M extension cable so it can detach from the meter Body for hard-to-reach applications. A set of Test leads is incl