UPC 601285852102

• Platen Press:15" x 15" (38X38cm). Hat/Cap Press: 6"x 3" (curved).Mug Press:3"-3.5"diameter (11OZ)
• Heat press machine equipped with digital LED temperature and time controller
• This heat press is full 360-degree rotation of swing-away design
• Package include:1 X Fully-assembled machine with platen press;1 X Hat press;4 X Mug presses;2 X Plate presses;1 X Removable silicone pad and cotton pad;1 X Operating Manual
• It can transfer colorful pictures and characters of sublimating and dissolved printing ink onto ceramics, glasses and textiles such as cotton, flax, chemical fiber, nylon, etc

8 in 1 Digital Transfer Sublimation 15" X 15" (38 X 38cm) Heat Press Machine for T-Shirt Mug Hat cap

This 8 in 1 heat press machine can be used for T-shirts, caps, ceramic plates, ceramic tiles, mugs, coasters, mouse pads, jigsaw puzzles, lettering, other misc. fabrics & materials. It can transfer colorful pictures and characters of sublimating and dissolved printing ink onto ceramics, glasses and textiles such as cotton, flax, chemical fiber, nylon, etc. This all-in-one press includes flat platen, mugs and plates. The swing-away heat press boasts all of the must-have attachments.

Item Specifications

Temperature range: 0 - 480ºF (0 - 250ºC)

Timer control: 0 - 999 seconds

Wattage: 1000W

Power input: 110V

Cord length: 4.5''

Dimension: 23.4"L x 20.2"W x 17.5"H

Platen Press : 15" x 15" (38X38cm)

Hat/Cap Press: 6"x 3" (curved)

Mug Press #1: 2"-2.75" diameter (6OZ)

Mug Press #2: 3"-3.5" diameter (11OZ)

Mug Press #3: 12OZ latte mug (Cone)

Mug Press #4: 17OZ latte mug (Cone)

Plate Press #1: 5" max diameter

Plate Press #2: 6" max diameter

Temperature setting:

Press "SET", the upper display will showing "SP", and the lower of display will showing the temperature of last setting. Then enter into temperature setting option, press ▼ or ▲ (increase or decrease) to set the needed temperature. After setting well, please press "SET", the upper display will show "SK" to go on the next step for time setting

Time setting:

Press "SET" again, H1 LDE will showing "ST", then enter into the time setting. Press ▼ or ▲ (increase or decrease) to setting the needed time. (Normally the time is 180 seconds for mugs and 15-20 seconds for t shirt printing)