UPC 608506535479

• Built-in high quality ceramic PTC heating element, quick temperature rising
• Temperature ranges widely from 100 C to 220 C which makes the glue gun good for both hot and cold applications. Perfect for crafts, home quick repair, office and school DIY projects ,the toy model , Artificial flowers ,Christmas tree ,Decorations ,the metals product, The wooden product ,card paper ,Electronics circuit plank ect..
• When the temperature reached the number you set , it will turn to temperature constant state ,no worries about the over-heating .
• The hot melt glue stocks is high quality transparent strip .Passed the SGS certificate and environmental-friendly .
• Lightweight, easy squeeze trigger, rubber coating for easier cleaning, detachable stand to keep the gun stable and upright, 5.5inch cord length.

Automatic Thermostat , The ceramic PTC thermistor will help to keep the constant temperature when it heats up to the set temperature. Adjustable Temperature , There's a dial that moves between 100 C-220 C for different use, the speed of the glue flow is different according to the different temperature, and you may need use a small flat-bladed screwdriver spinning on the dial to change the temperature. Interchangeable Narrow Nozzle for Detailed Work , The diameter of the nozzle is about 9.20mm, orifice diameter is 3mm, length of whole nozzle is about 30mm and you can change to the longer one for different use.The copper nozzle has the better thermostability than the other nozzles. Note: We also have other 40mm 50mm 70mm 2.0m/3.0m diameter avaliable glue gun extension nozzles for any big and small detailed projects. Tips , 1 Diameter of the glue strips should between 10.8mm-11.8mm.If the the applied stick doesn't match, the glue gun may be damaged. 2 The nozzle and the glue liquid are hot when the gun is working, please don't touch it. 3 If the glue gun doesn't work for 15min, please cut off the power source to avoid the melting glue recirculating or damage. 4 It may has the light smoke the first use, it is normal and it will die off 10min later. 5 Please let the bracket stand to cool down the gun for several minutes after use, and don't change the other power cord with it. 6 If the strip is left after use, please don't pull it off, just let it in the gun for the next use. 7 It is normal for some glue flowing out after the few seconds you finish working because of the inertia pressure. Specification , Frequency:50-60HZ , Voltage:100-240V, Weight:245g , Cable Length:140mm , Size:190 110mm , Package , 1 Glue Gun ,