UPC 619317822474

• MOST EFFICIENT BITMAIN FAN SIMULATOR IN 2019 This is the most efficient little device you can use to emulate the cooler fan presence and make the ASIC think that the fan is running perfectly. You can completely remove the fans if you are cooling your device with oil submersion as they won't be required in the cooling system. It's a neat device with an expert product finesse & we are sure you are going to enjoy adding this to your Bitcoin mining hardware kit.
• EASY PLUG & PLAY INSTALLATION It is a simple plug-and-play device with no programming required & does not need any configuration as well. It allows the miner to run without any errors by sending a fan sense, a tachometer signal, to the miner's controller tricking & making the it believe that it has fans attached and working within parameters. Each Antminer cooling fan requires 1 emulator & PCB plugs directly into the primary fan port. It's as simple as that!
• OIL IMMERSION & CALIBERATION Bitcoin/Crypto miners like the Antminer S15, S11, S9, S7, S5 & they know very well that having an effective cooling system is essential for their success. Immersed either in a dielectric oil or 3M Novec ensures a cooler environment & stable system performance. Fan can run at full speed & also the RPM can be adjusted at any time. The device typically reports fan speeds around 6000-8000 RPM which is good enough for an Antminer S9/D3/L3+ etc.
• HIGH QUALITY COMPONENTS & POWER CONSUMPTION Our package will include 2 emulators, they are horizontally oriented & come with insulated power cord/Antminer cable. The printed circuit board undergoes a transport stability test and a final 1 hour performance test to ensure product quality. With 12 V & 0.09 W power, it consumes extremely less amount of power to operate which is far less than a fan. This is suitable for Bitcoin Mining Machines, Mining Rigs or other devices that use 4pin connectors.
• MONEY BACK PRODUCT WARRANTY It is a fully compliant & backed up by manufacturer's warranty so feel free to contact us for any query or information. We have a track record of ensuring happiness of clients and are absolutely confident that our product will exceed your expectations. Just in case the product falls short of your expectations in any manner, you can return it for a 100 refund. We will go an extra mile to redress the situation at hand.

Our product acts as an Antminer cooler by replacing the Bitmain Antminer's fan and provides a tach signal to the Antminer Control Board/Antminer Power Supply. Simply unplug the fans and plug in the fan emulator. The Antminer now starts thinking that it has control over fans that do not exist. This can be used for other applications that use high RPM , pulse width modulated fans. Our device is designed specifically for Antminers by a team of specialist engineers with high quality, professionally masked printed circuit board to meet the updated requirements as per user demand. You can completely remove the fans if you are cooling your device with oil submersion, so need to worry about having a fan shroud or a fan duct. The device also allows you to install low noise fans if you have very cold temperatures or are underclocking your miner/bitminer. We do not compromise on product quality & always keep it as our first priority. We have a remarkable after sales service & provide a free product replacement warranty. If you are not satisfied for any reason, within the first 30 days, return it for a full 100 refund We are absolutely confident that this product just like others will not disappoint you and will exceed expectations. Feel free to contact in case of any issue or further information.