UPC 632230381101

• Long Cable Enough for Crafting : 6.56FT Long Cable ! ! Hot air shrink gun was made of high quality stainless steel inside and ABS plastic outside, simple design and durable quality, mini dimensions 240 50mm / 9.44 1.97in
• Suitable for:This excellent compact heat gun can be used for heating shrinkable film, embossed powder, rubber stamp.Built-in stand for self-support and table top use
• Voltage & Cooling Holes:Voltage 110V, the temp of the nozzle could reach to 200 in seconds.The heat vents of heat gun tail can decreased the internal high temp and extend the life
• DIY Essentials Part : If you like DIY, this is a good accessory for you. Even ,you can replace toaster or oven and the polymer clay will become hard and bright after using the gun
• Warm Tips:The temp of the nozzle could reach to 200 in seconds, please don't use it more than 10 minutes in one time, just turn off then turn on for working continuously

Features: 100 Brand New and High Quality ABS and PC plastic material, it equip with the stainless steel bracket to rotate 100 degress. It is Very compact and durable, practical Keeping 5-6cm distance from work and about a 45 degree angle to heat until it is completed. It not only can add its hardness, but also its brightness There are heat vents in left and right sides to decreased the internal temp and extend its lifetime This excellent compact heat gun can be used for heating shrinkable film, embossed powder, rubber stamp, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the gun The temprature can not be adjusted, but in theory, it can reach at about 200 degree within a few seconds abstractly. But do not use it more than 10 minutes, just you can turn off then turn on again for working continuously Specification: Material: Plastic ABS+PC Cable length: 6.56FT /180 cm Working temp.: About 200 Rated Power: 300W Rated voltage:110v Power: 50-60Hz Working time: 8 minutes Power type: AC power supply Type: Constant temperature Attention: -Do not touch with water! Do not touch the hot nozzle. -Do not use outdoor. Keep it out reach of children. Keep 5-6cm distance between the heat tool and itrm. -Do not use more than 10 minutes continuously to prevent overheated. -This hot air gun is specially made for DIY, it can't not use in industry aspect Package includes: 1 x Hot Air Gun