UPC 633841292510

• REQUIRES 176-264 VOLTS TO WORK 50/60Hz / 15 Amp Max
• Works for All ASIC Miners like S9, T9, A3, D3, X3, E2, E3 and all GPU miners
• Includes 5 pairs of 6-pin PCI-E power connectors, 10 in total
• 1800-Watt Power Supply 90% Efficient
• 12 month manufacturer's warranty

REQUIRES 176-264 VOLTS TO WORK! The APW3++/ PSU is specifically designed with mining operations in mind, and combines high conversion efficiency and a strong dynamic performance into a power dense package. It also features short circuit, overload, overheat, low voltage and overload protections. The air flow direction runs from the AC input to the DC output, which is the same configuration as most miners. This proves beneficial for those with large-scale mining operations where heat management is a major consideration. This Power Supply can work stably in environments with a 50°C ambient temperature. If temperatures exceed 50°C, the PSU should be underclocked (refer to Max Load vs. Ambient Temperature Graph in the user guide for details). Considering the high temperature in mining operations, all internal components are selected with a standard of 105°C, so this 1800W Power Supply has a much longer lifespan than a general use PSU under similar high temperatures. This Power Supply uses a PCI-E connector which is compatible with currently available ATX PSUs, as well as most bitcoin mining machines.One Power Supply of 1800W is enough to power two AntMiner S5s at the same time. One can work for all S9 Miners, T9, A3, L3, D3, E3 ASIC Miners and algo any GPU miner requiring a minimum of 1800W. The high power efficiency translates to big cost savings -- if one uses a secondhand general use PSU running at 83% efficiency, when compared to this 1800W Power supply running at 90% efficiency, assuming an electricity cost of $0.10 per kWh, a user could save more than $150 USD per year in power fees. Note: 1. The PSU cannot be used in countries with a mains power voltage lower than 176V. The PSU will not start below this voltage.