UPC 647923366877
Barcode for LoveRPi USB Type C to 4 Port USB 2.0 Hub for Raspberry Pi 4 and Phones
Scannable Barcode for UPC 647923366877
Sellers
| Marketplace | Price | Updated |
|---|---|---|
| $5.99 | 05/01/2021 15:04:20 GMT - Details |
Recently Searched
UPC 782905287280
Boran 4-Port USB C Hub High Data Transfer USB Type C to USB 3.0 Aluminum Charging Port for MacBook Pro MacBook Mac Pro Mac Mini ChromeBook XPS Flash Drive Mobile HDD Car
Best Price: $10.99
View Product
UPC 736557226500
4 Port Micro USB Power Charging OTG Hub Adapter Cable for Samsung Galaxy S6, Samsung Galaxy Note, Samsung Galaxy Tab3 8.0, Sony Xperia NX-02D, Sony Xperia, Sony S-Series Tablet
Best Price: $10.90
View Product
Attributes
| Attribute | Value |
|---|---|
| Binding | Electronics |
| Brand | LoveRPi |
| Color | White |
| Size | USB-C to 4 USB 2.0 |
| EAN | 0647923366877 |
| Manufacturer | LoveRPi |
| MPN | LRP-USBHUB-OTG4USB |
| UPC | 647923366877 |
Description
- FULL SIZE USB 2.0 PORTS FOR YOUR DEVICE: Simple plug and play USB Type-C hub for host-mode capable devices including HP, Lenovo, Dell, and Acer Computers and Tablets. Connect additional peripherals like keyboards, mice, and other low power accessories. Get the most bandwidth for your USB based devices without sacrificing performance through our reliable USB hub chipset.
- REQUIRES POWER CAPABILITY FROM DEVICE: The components you connect must be within the power envelope of your device. This is an unpowered hub and uses very little power by itself. Make sure that the accessories you connect are within the power supply capability of your device. For example, if your phone is only capable of delivering 1A of current and peripherals use more, they may not work at all or work intermittently.
- NON-BLOCKING PORTS: Our hub is laid out so that multiple USB devices can be plugged in without blocking each other. It is laid out ideally so that each port can be used and interference is minimized.
- RASPBERRY PI 4 ADDITIONAL STEPS: By default, Raspberry Pi 4's USB Type C port is configured for slave mode. Plugging in this hub will not automatically work. You need to enable host mode by adding "dtoverlay dwc2, dr_mode host" without quotes to the bottom of the config.txt file. In Raspbian, this is under /boot/config.txt
- AVAILABLE IN BLACK AND WHITE AND PROJECT READY: Need to add USB ports to a Raspberry Pi 4 project? The external case can be disassembled by pulling the top and bottom apart. Integrate it directly into your customized project!
Price Disclaimer
Product prices are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on amazon.com, amazonsupply.com, or myhabit.com at the time of purchase will apply to the purchase of this product.