UPC 650045133661

• Specifically designed for Apple Macbook Pro 13 inch (2016 & 2017 release) with touchbar A1706 (4 Thunderbolt 3 Ports) and without Touch Bar A1708(2 Thunderbolt 3 Ports). Please kindly check the model number (A1xxx) on the back of your Macbook before your purchase
• Light & Ultra Slim & Safe: [NO CUT OUT design] fully vented for heat disbursement. 8oz(230g) in weight and 1.2mm(0.04 inch) in thickness, ultra thin and lightweight but it protect your Macbook from accident drop, finger slip, spills, scrapes, knock, scratch and daily contaminate
• Fully access to function your Macbook: Snap on design. Easy put on easy remove off. Open your laptop all the way back (just like without the case); plug your charger, cable or headset without removing the case
• [Note: Keyboard cover for A1706 & A1708 is different] Besides a folio laptop case (fit both A1706 & A1708), package will come with 2pcs silicone keyboard cover: 1 piece compatible with model A1706 and 1 piece compatible with model A1708
• Compatible with: MacBook Pro 13 Case 2017 & 2016 Release. [Compatible Models: A1706 & A1708] Released June 2017 Part Number --- MPXT2LL/A, MPXU2LL/A, MPXV2LL/A, MPXX2LL/A, MPXQ2LL/A, MPXR2LL/A, MPXW2LL/A, MPXY2LL/A Released October 2016 Part Number --- MLH12LL/A, MLVP2LL/A, MNQF2LL/A, MNQG2LL/A, MLL42LL/A, MLUQ2LL/A --- WARNING: Case DO NOT FIT Models: A1278 & A1502 & A1425 [Email us if you are not sure]

This case is only compatible with 2016 & 2017 newly released Macbook Pro 13 A1706 & A1708 Laptop screen size: 13.3 inch Laptop dimension: 11.97 x 8.36 x 0.59 inch Case dimension: 12 x 8.5 x 0.6 inch Case NOT Compatible with *MacBook Pro 13" with CD-ROM (A1278) * MacBook Pro 13" with Retina Display (A1502 / A1425) * MacBook Air 13" (A1369/A1466) ** More Concerned Features ** Changes towards your laptop on our case: Weight: Laptop only: 3.02 lb Laptop with case: 3.56 lb Thickness: Laptop only: 0.59 inch thin Laptop with case: 0.637 inch thin Use &Function: 1. No influence towards laptop open and close, you can open your laptop all the way back 2. No need to take off the case when you need to charge or plug in, all ports accessible 3.Case (smooth matte) won¡¯t scratch the surface of your Macbook or your finger; the keyboard cover (flexible silicone) won¡¯t harm your laptop screen 4.Our Matte case will add more friction (better grip) on holding compared to hold a glossy slippery bare laptop Color Select Advice If you want to show the original color of Macbook, apple logo or decal (sticker) through the case, color - crystal clear will show out the best, light color followed, deep color and solid color is almost invisible. Installation: 1. Start with the top cover [the 3 clips fit the front side] Let your Laptop open and facing you like you are using it, Clip the 2 clips on cover at the back of Macbook. Then pull the case slightly to the front and clip the 3 clips ¡°clicking¡± 2. Turn over your Macbook to wear the bottom cover Clip the bottom cover on the back of Macbook, then pull the cover slightly to the front and clip 2 clips ¡°Clicking¡± ************ For any doubt before Purchase, welcome to contact us ************