UPC 651519699249

• 20kg large torque. 20 kg cm 6.6V. Dimension: 40 20 40.5mm
• Full metal gear. it's better for accuracy, service life has been greatly increased
• Aluminium Case. Enhance the heat dissipation, ensure that servo motor can work well
• Using high-precision potentiometer with new design. Accuracy and linearity have been greatly improved! Accurate movement can satisfy the needs of making robots.
• 180 degree rotation. Controllable angle range from 0 to 180 degrees, Excellent linearity, precision control. Can be rotated within 360 degrees when power off

Specifications: Weight: 65g, Dimension: 40 20 40.5mm, Speed: 0.16sec/60 , Torque: 20 kg cm 6.6V, Working Voltage: 6-7.4V, Min Working Current: 1A, No-Load Current: 100mA, Spline: 25T, The servo wire: 30cm in length, Control Specifications: Control Method: PWM, Pulse Width: 500 2500, Duty Ratio: 0.5ms 2.5ms, Pulse Period: 20ms, Please make sure that the duty cycle of the controller you are using conform to our specifications, otherwise the servo can't turn up to claimed degree, Wire Layout: Red Wire: +, Black Wire: GND, White Wire: PWM/Signal, Package Contents: 1 x Digital servo, 1 x Servo horn kit, If you have any questions, please feel free to contact us, we will help you as soon as possible, Note: Please be sure to avoid locked-rotor when using servo, locked-rotor means that artificially or machine obstructs the servo to rotate normally, the locked-rotor will lead to internal current increased to more than 7 times and the temperature increases, servo will burn out. Important: 1. Connect GND is necessary. 2. It's recommended that use lithium polymer battery with high rate discharge, please don't use dry battery. 3. Please use a short and thick power cord, don't use Dupont cord, 4. Not compatible for redcat thunder drift rc car, not compatible for 1/16 scale car.