UPC 661083373773
Barcode for Comidox 15KV Boost High Voltage Generator High Frequency Transformer Inverter Arc Igniter Coil Module Disassembled Parts for DIY Use 2Sets
Scannable Barcode for UPC 661083373773
Sellers
| Marketplace | Price | Updated |
|---|---|---|
| $5.99 | 02/22/2022 00:20:01 GMT - Details |
Recently Searched
UPC 750076279694
Digital Audio Extender Digital Optical/Coaxial Digital Audio Extender/Converter Over Single Cat5e/6 Cable up to 500' Standard Supported for LPCM, DD5.1, DTS, and D True HD
Best Price: $45.99
View Product
UPC 751433493456
Replacement Ear Pads Compatible with SR850, SR950, K240, Fidelio X2/27, HE-400I, HE-560, HE4XX Series, SE-A1000, M1060 Headphones
Best Price: $16.99
View Product
Attributes
| Attribute | Value |
|---|---|
| Binding | Unknown Binding |
| Brand | Comidox |
| EAN | 0661083373773 |
| Manufacturer | Comidox |
| Model | CP214 |
| MPN | CP214 |
| UPC | 661083373773 |
Description
- This kit is made for the booster coil and has a professional circuit diagram for the convenience of electronics enthusiasts.1 set of list PCB Board/120 ohm resistance/UF4007 ultra-fast recovery diode/N20 transistor/Heat sink/M3 6 screws/Boat switch/Pin header
- Uses: Chinese-language general experiments, electronic instruments, negative ion generators, scientific small production, etc. This circuit works with a stable high-frequency arc, which is extremely high in temperature and can easily ignite combustibles. Therefore, it is called a plasma lighter.
- Transformer structure: The transformer has two windings in the primary, one set of thick copper wire is the main winding, one set of thin copper wire is the feedback winding, and the secondary output is high voltage. In the transformer, two thick and thin copper wires are wound together, which are the main winding tail and the feedback winding head, respectively, connected to the positive pole of the power supply.
- Before welding the transformer, it is necessary to scrape off the welded portion of the coating and the covered wire tip with a blade and then solder. After successful production, the transformer must be potted with epoxy or insulating wax for long-term use. The maximum output of the transformer is designed to be 15KV, and the maximum output must not exceed 15KV, which is 1.5cm arc.
- The kit has an input voltage of 3.7V. That is, the voltage of the 18650 battery, if you need to increase the input voltage , you need to increase the resistance of the feedback resistor , otherwise the triode is easy to burn out. The feedback resistance is increased to approximately 150 to 1.5 K . Resistance should be adjusted from large to small. It should not be too small.
Price Disclaimer
Product prices are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on amazon.com, amazonsupply.com, or myhabit.com at the time of purchase will apply to the purchase of this product.