UPC 661094417879

• Transmitter + receiver: one portable adapter to use as either transmitter or receiver, powered by the latest Bluetooth 5. 0, can pair with two headphones/ speakers at once.
• Optical + 3. 5mm: you get maximum flexibility with support for both 3. 5mm and optical digital, both input and output are supported.
• Low delay: apt Low Latency technology Eliminate Bluetooth Audio delay, so you can watch TV/ movie/ video and listen to high-clarity sound in perfect synchronization. Note: apt Low Latency only supports TX mode.
• Constant streaming and automatic re-pairing: internal battery provides up to 15 hours of using, support charging and streaming at the same time, and automatically re-pairs with existing paired devices.
• Cable-free roaming: keep your old stereo or wired headphone alive with new Bluetooth wireless Connection, Pair with smart phone or tablet from up to 30 feet away, and enjoy great music cable-free.

Connect to TV via digital optical Audio out , 1. Find the digital optical Audio out jack on your TV. 2. Connect the transmitter tt-ba09 to your TV via the digital optical Audio out jack using the digital optical cable. 3. Pair the transmitter tt-ba09 with your Bluetooth headphones/speakers. Connect to TV via aux/ RCA audio out once the transmitter is connected to Bluetooth stereos, the blue LED indicator will remain on. If there's no sound coming out from your stereos, please kindly have a check see if you have plugged the unit into the audio output jack on your TV. Pair with two Bluetooth headphones/speakers simultaneously , 1. Turn on your speaker/headphones and the transmitter, place them into pairing mode . Making sure they pair with each other successfully. 2. Turn off the Bluetooth of the speaker/headphones and turn on speaker/headphones B. Then tap the power button twice of the transmitter to pair and connect to your speaker/headphones B. Also make sure they pair with each other successfully. 3. Turn on the Bluetooth of speaker/headphones a. In approximately 30 seconds, it will automatically connect in. And now the audio will be transmitted to both speakers/headphones. Note , 1. If the transmitter could not pair with the headphones/speakers successfully, please kindly reset both the transmitter and the headphones/speaker. 2. The transmitter is supported to aptX Low Latency codec, aptX Low Latency supported headphones/speakers are also required for the audio to be encoded via this codec. What is in the box, 1 x TaoTronics Bluetooth 5. 0 , 2-in-1 adapter , 1 x 3ft digital optical slink cable/ 50cm audio cable , 1 x 3. 5mm 1. 64ft/ 50cm audio cable , 1 x 3. 5mm female to 2 RCA male Cable, 1 x USB charging Cable, 1 x user guide