UPC 667797749873
Barcode for NOYITO TDA2050 TDA2030 NE5532 2.1 3-Channel Hi-Fi Subwoofer Amplifier Board 18W+18W+32W Compatible with LM1875
Scannable Barcode for UPC 667797749873
Sellers
| Marketplace | Price | Updated |
|---|---|---|
| $15.99 | 08/22/2021 00:19:53 GMT - Details |
Recently Searched
UPC 094701521650
COOPER BUSSMANN JJN-100 Fuse 100AMP 300V Very Fast Acting
Best Price: $26.60
View Product
UPC 885484457768
Dorman 904-7109 Engine Oil Pressure Sensor for Select Trucks
Best Price: $105.24
View Product
Attributes
| Attribute | Value |
|---|---|
| Binding | Kitchen |
| Brand | NOYITO |
| EAN | 0667797749873 |
| Manufacturer | NOYITO |
| UPC | 667797749873 |
Description
- The bass is powerful and strong, and the treble is crisp and not harsh.The bass unit is a TDA2050 - the output peaks to 32W. The two-channel unit is 2 TDA2030 - the output peaks to 18W+18W. The TDA2030, TDA2050, and LM1875 can be completely interchanged. If all of them are replaced by TDA2050 or LM1875, replace the larger heat sink.
- The rectifier filter adopts two large 3300UF/25V electrolytic capacitors, which can provide enough low-ripple DC power supply to the whole circuit, and the sound can still be released freely when the dynamic output is large.
- The low-pass preamplifier circuit uses the NE5532 dual op amp, and the audio coupling capacitor uses high quality CBB capacitor. The bass is powerful and flexible. Rectifier circuit uses SEP large 6A rectifier bridge to ensure that there is enough current output, maximize the power amplifier chip efficiency.
- Post-amp: The subwoofer use TDA2050A amplifier to achieve an output power of up to 32W. The playback DJ is very shocking; the left and right channels use two TDA2030A output amplifiers, and the output power is 18W + 18W. This kind of power is very reasonable. Can adjust the high school bass to the best, to meet the needs of different hearing.
- This board is equipped with an MP3 decoder board audio input header and a 12V regulated DC output header for powering the decoder board. The 12V power output from the board is used to power the decoder board. Do not connect the GND of the decoder board's audio input during wiring to reduce interference; if the decoder board alone supplies power, it must be connected to GND.
Price Disclaimer
Product prices are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on amazon.com, amazonsupply.com, or myhabit.com at the time of purchase will apply to the purchase of this product.