Scannable Barcode for UPC 682559365719
Sellers
| Marketplace | Price | Updated |
|---|---|---|
| $258.00 | 02/05/2021 00:32:36 GMT - Details |
Recently Searched
UPC 791715885944
DHcamera 10 Pin Remote Flash Rubber Sync Terminal Cap Cover for Nikon D810 Repair Part
Best Price: $14.99
View Product
UPC 610563548576
Foto & Tech Wired Remote Control Shutter Release Replaces MC-30 Compatible with Nikon DSLR 10-Pin Connection D850 D5 D500 D4s D4 D3 D3x D3s D810A D810 D800 D800E D2 D2H D2Hs D2X D2Xs D300 D1 D300s D700
Best Price: $10.99
View Product
Attributes
| Attribute | Value |
|---|---|
| Binding | Electronics |
| Brand | Tilta |
| EAN | 0682559365719 |
| Manufacturer | Tilta |
| MPN | Nucleus-Nano with P-Tap |
| UPC | 682559365719 |
Description
- Note: The USB mount on the wheel is not allow to connect to power, it is only for data update.The Nucleus-Nano uses a brand new state of the art power-efficient miniature motor. The Nano Motor features low noise and high torque. It can perform super fast focus pulls with silent precision! The built-in 15mm rod adapter allows for flexibility and compatibility with a wide range of camera rigs and professional mounting solutions.
- Includes a P-tap to Micro USB cable for the Nucleus-Nano which allows you to power the motor from a P-tap power output port. The 14.8V output that P-tap ports provide give the motor a much higher torque than if powered through a 5V USB power cable.
- The Nano Motor allows for automatic calibration of the lens as well as a manual calibration if you are using lenses that don't have hard end stops at close focus and infinity via the ability to set A-B limits on the Nano Hand Wheel Controller. Every motor has a 0.8 mod, which is the standard gear size for most cinema lenses. The torque of the Nucleus-Nano Motor at 5.5V is 0.65Nm and at 14.8V is 1Nm.
- The motor has a 5-18V input tolerance for power via a Micro USB port. This allows the motor's power to be drawn from the G2X tilt motor's 5V Micro USB output or via a P-tap to 5V Micro USB cable .The Nano Motor is also able to connect to the Nucleus-M's FIZ hand unit and hand grips, allowing for a variety of ways to control the motor as you see fit.
- The Nano Motor has its own built-in motor drive that communicates directly with the Nano Hand Wheel Controller. This negates the need to mount a separate MDR to your rig, allowing for a more compact camera setup and a quicker setup time. Simply set the Nano Motor and Nano Hand Wheel Controller to the same channel and you will have full control. The wireless range of both the Nano Hand Wheel Controller and Nano Motor is 300 feet!
Price Disclaimer
Product prices are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on amazon.com, amazonsupply.com, or myhabit.com at the time of purchase will apply to the purchase of this product.