UPC 682559643978

• Compatible The Drscreeniphone 5s/se replacement glass screen is only for iPhone 5s/se black; NOT iPhone 5 or iPhone 5S
• Easy to Install The iphone 5s/se full screen replacement kit come with home button, ear speaker, front faced camera, front microphone, light & proximity sensors .Also Along with all the tools you need to fix your phone. Also, installation videos will be sent to you after you complete the order
• Quality Guaranteed Our iphone 5s/se led screen replacement is strictly tested before shipping. Replace/Repair your broken, old, cracked, shattered, damaged LCD screen display with our touchscreen replacement.
• LIFE-TIME-Warranty, Buy with Confidence Life-time Warranty for new screen replacement or refund for Non man-made quality issues. If there is any issue, please contact us via Amazon message for solutions. We are always stand by our products
• KINDLY NOTE 1. The Touch ID function will only work with your phone's original home button assembly. You will need to transfer the button assembly from your old display to retain Touch ID 2. DO NOT over-bend or use excessive force to tear it.

Compatible: Replacement screen only work for Apple iPhone 5S/SE black, NOT iPhone 5 or 5C. Apply for Screen replacement is used to repair or replace your wrong, cracked, damaged, faulty, shattered screen, also cure display problems, dead pixels, cracked screen, wrong color issues. We have all the product strictly 100 tested before shipping. To offer the best service to our buyers. If there is any question or problem, please contact us via Amazon message for assist. We will stand by our customers and products. Package includes: 1. Full digitizer assembly for iPhone 5s/5se black 2. A set of Repair tools 3.Tempered glass screen protector for iPhone 5s/se . Instruction: Remove the Old Screen 1. Power off your iPhone 2. Remove the two pentalobe screws the bottom of the device . 3. Using the suction cup to get a grip on the screen to pull it upward, pry the screen from the metal frame of the device . 4. Pull the screen back to a 90 degree angle with the rest of the device, but do NOT pull it off. Disconnect the three connectors that are holding the screen to the motherboard Attach the New Complete Screen to the Motherboard 1. Reconnect the three connectors to the motherboard and make sure they are connected properly. 2. Replace the metal plate that goes over the connectors. 3. Slowly fold the screen back onto the rest of the device from top to bottom . 4. Turn it on and bask in its unscratchy-ness. Note: Don't force the display if it isn't snapping into the brackets along the side. Make sure you're lining up the top correctly and try again.