UPC 684191963179

• Complete Twin tank water softener provides continuous soft water.
• Comes Standard With Paddle Wheel and Turbine Meter-Note: Both meters come with the unit. Be sure there is an additional Turbine meter shipped with your system. You have the option of using the Paddle Wheel Meter that is already connected to the valve. Pros: more durable. pre-programmed into valve. Cons: larger The Turbine meter: Pros: compact. Cons: not as durable. requires additional programming to change meter type to T0. 7.
• With a twin-tank system featuring the new Fleck 9100 valve, customers benefit from soft water 24/7.
• Resin Ships Loaded For Easier Installation - USA black Mineral Tanks
• Free bypass comes with male threaded yoke for easy installation --

Complete water softener comes with: 3. 0 CUBIC FEET OF RESIN, 48, 000 GRAIN CAPACITY PER TANK , FLECK 9100SXT CONTROLLER, TWO MINERAL TANKS, Salt Tank, BYPASS, COMPLETE SYSTEM 47X18X62 inches, 3/4 inch or 1 inch connections, BRINE TANK w/safety float. 24/7 Soft Water In Your Home or Business. Twin tanks provide continuous soft water. With a twin-tank system featuring the new Fleck 9100 valve, customers benefit from soft water 24 hours a day, seven days a week. That's because the second tank of soft water acts as a backup, ready to immediately provide soft water once 100 of the first tank is used. While the second tank is in service, the first tank regenerates, giving you all the advantages of continuous soft water. The 9100 valve has been engineered and tested to withstand the equivalent of 27 years of uninterrupted daily use. 15 savings in both water and salt. Unlike pre-set systems, the twin-tank system regenerates with soft water only when necessary. Plus it uses 100 of the tank in service. The end result? Fifteen percent savings in both water and salt. Compared to a system with meter delayed regeneration and the reserve set at 30 of the system capacity, provided that half of the reserve capacity is unused. Only pennies per day to operate. How the Twin-Tank Softener works. Hard water enters the tank in service, and fills it. As it passes through the resin, the hard water ions are attracted to the resin. By the time the water gets to the bottom of the tank, it's soft. Regeneration Process When the resin becomes saturated with hard water ions, the tank goes into regeneration. Brine water is injected into the tank and rinses the hard water ions off the resin and down the drain. Once the resin is free of the hard water ions, fresh, soft water back washes all the brine water out, leaving the tank ready for service.