UPC 686268753539

• Spring built-in balance system looks more upscale and professional than others whose are exposed to the outside.
• The bearing capacity of microphone stand has been improved significantly to hold up to 4.4 lbs.
• The length of single scissor arm stand is 19 inches which could be rotate 360 degrees with a maximum reach of 38 inches horizontally and 33.5 inches vertically.
• The square tube with 0.53 inch is better material than square pipe with normal size of 0.39 inch.
• The sturdy microphone stand with better compatibility even without hanging any heavy weights could be balanced at any position within adjustable range and will not bounce up. It is suitable for both heavy-duty microphones and light microphones.

Description, InnoGear microphone scissor arm stand is suitable for any stores, families, stages, studios, broadcasting and TV stations, etc. It is made of high quality iron frame. Max load: 2KG. Movement is solid and smooth without any metal noise. Specification, Single stand length: 19inch , Square pipe diameter: 0.53inch , Maximum clamping thickness of the base: 1.97inch , Maximum vertical height: 33.5inch , Maximum horizontal height: 38.0inch , Maximum weight: Max 2kg , Specification of connecting rod connector: 5/8", Material: Iron, Package Included, 1x InnoGear Spring Built-in Microphone Stand , 1x InnoGear Desk Mounting Clamp, 5 x Velcro Ties, 1 x User Manual, Note, 1 The base can only be clamped on the flat edge of the table, otherwise it cannot be fixed, it will damage the stand and microphone. 2 Test that you have mounted the clam securely by seeing if you can pull it off the edge of the table. 3 When you need to rotate the stand, first loosen the fixing screws on the side of the base, rotate the stand to the desired direction, and then tighten it again to avoid scratching the pins on the stand.