UPC 687965015678

• Pack of 12 filters
• 400 Series Spin-on Filters have a high-capacity 1" opening for newer models
• Has a maximum flow is 25 gpm/93.75 lpm and maximum working pressure of 50 psi/3.4 bar
• Preferred for gasoline and diesel fuels
• Water-holding capacity is 130 milliliters or 4.5 ounces before flow restriction occurs

The Cim-Tek 70060 dispenser filter removes particulates like dirt, dust & rust. For use with gasoline, diesel, biodiesel blends up to B20, and ULSD. The maximum flow is 25 gpm/93.75 lpm. The maximum working pressure is 50 psi/3.4 bar. The maximum differential pressure is 25 psi/ 1.7 bar. The 400 HYDROSORB Spin-on Filters have a high-capacity 1 in. opening required for newer model service station pumps and Gilbarco Advantage Series dispensers. The 400HS-10 Type 2, a nominal 10 micron, is recommended for gasoline and diesel fuels. The 400HS-30 Type2, a nominal 30micron, may be preferred for heavier distillates such as diesel fuel and fuel oils. The water-holding capacity for the 400HS-10 Type 2 and the 400HS-30 Type 2 is 130 milliliters or 4.5 ounces before flow restriction occurs. The 400 HYDROSORB Spin-on Filters are recognized by Underwriters Laboratories for use on service station pumps and high-speed dispensers.