UPC 697666117144

• 2 HP Motor / 230 Volt with built-in overload with automatic reset
• Pipe connections: 1 1/2" NPT suction 1 1/2" NPT discharge
• Great Pump for lawn sprinkling, irrigation, AC systems, Heat pumps, Water transfer or Dewatering
• Up to 86 GPM at 5ft suction lift 20psi
• Self-Priming Design

Specifications for the Goulds GT20 Model: Motor: 2 HP, 230 volt, single phase motor Pipe Connections: 1-1/2" NPT Suction / 1-1/2" NPT Discharge MAX Suction Lift: 25 Ft MAX Total Dynamic Head: 127 ft MAX Discharge Pressure: 55 psi GPM/Pressure Performance Rating examples for the Goulds GT20: 20 PSI Discharge Pressure: 5 ft Suction Lift: 86 GPM 15 ft Suction Lift: 70 GPM 25 ft Suction Lift: 46 GPM 30 PSI Discharge Pressure: 5 ft Suction Lift: 80 GPM 15 ft Suction Lift: 67 GPM 25 ft Suction Lift: 44 GPM 40 PSI Discharge Pressure: 5 ft Suction Lift: 65 GPM 15 ft Suction Lift: 57 GPM 25 ft Suction Lift: 43 GPM 55 PSI: : 0 GPM Goulds GT Series Standard Features: Self-Priming Design: Once pump is initially primed, filled with water, it will re-prime when the water level rises above the end of the suction pipe. Serviceable: Back pullout design allows dis-assembly of pump for service without disturbing piping. Two compartment motor for easy access to motor wiring and replaceable components. Diffuser : Bolt down diffuser provides positive alignment with impeller. Diffuser has stainless wear ring for extended performance in abrasive conditions. F.D.A. compliant, injection molded, food grade, glass filled Lexan for durability and abrasion resistance. Impeller: F.D.A. compliant, glass filled Noryl. Corrosion and abrasion resistant. Corrosion Resistant: Electro-coat paint process is applied inside and out, then baked on. Casing: Cast iron construction. Four bolt, back pull-out design. Tapped openings provided for vacuum gauge and casing drain. Powered for Continuous Operation: Pump ratings are within the motor manufacturer's recommended working limits. Can be operated continuously without damage. Mechanical Seal: Carbon/ceramic faces, BUNA elastomers. 300 series stainless steel metal parts. Pump design prevents the seal from running dry.