UPC 700175766595

• Compatible with all official Guitar Hero World Tour controllers that have the touch slider on the neck .
• This kit includes two brand new replacement microswitches. The guitar shown in the listing image is not included. These are upgraded microswitches are superior quality and are designed to eliminate the design flaw that caused the original microswitch to break in the first place.This repair can be performed by someone with little or no previous soldering experience in about half an hour and is a very simple and effective way of repairing a Guitar Hero Guitar .
• The only tools you will require if you do not already own them are: Soldering iron, De-soldering pump , T10 Torx screwdriver/bit, Phillips head screwdriver.
• MPF TM and MPF Products TM are Trade Marks.

If your Guitar Hero guitar has got strumming problems, this is the answer. Quick and easy solution to the strumming not working AND phantom strumming, where the strummer activates without you touching it - both are caused by the switch failing. Compatible with all official Guitar Hero World Tour controllers that have the touch slider on the neck . Simple Repair Instructions: Step 1:Remove Neck and Faceplate. Step 2:Remove Screws 11 torx screws on body of guitar using torx screwdriver. Remove 4 phillips head screws at top of body using phillips head screwdriver. Step 3:Open Guitar by Splitting Case Halves Apart. Examine switchbutton circuit board to determine which switch is strum up and strum down. Step 4:Unscrew 4 corner screws on the Switchbutton Circuit Board. Step 5:Desolder & Remove Old Switches using soldering iron and desoldering pump . Step 6:Solder in New Switches. Step 7:Reassemble Guitar. There is also a YouTube repair video I can send you the link to after purchase upon request.