Scannable Barcode for UPC 701715430761
Sellers
| Marketplace | Price | Updated |
|---|---|---|
| $10.22 | 03/29/2022 16:29:50 GMT - Details |
Recently Searched
UPC 701715442283
ALAMSCN 5V Boost Converter Step Up Power Module Lithium Battery Li-ion Charging Protection Board 134N3P with USB and Micro Port for DIY Charger
Best Price: $8.99
View Product
UPC 723264883010
ZZHOB 25PCS Pre-Wired 0805 SMD LEDs Micro LED Light Emitting Diode + Connector & Battery Holder
Best Price: $8.90
View Product
Attributes
| Attribute | Value |
|---|---|
| Binding | Wireless Phone Accessory |
| Brand | MELIFE |
| EAN | 0701715430761 |
| Manufacturer | MELIFE |
| MPN | 15503 |
| UPC | 701715430761 |
Description
- Designed for 18650 battery DIY power bank: The battery of the 18650 battery must be flat, and the length is 65MM. The pointed battery cannot be used. If you are using old batteries, different capacities, different brands are not available, the assembled battery is guaranteed to be at least 3.5V per voltage. If the voltage is too low, it will not be charged. .
- Supported connection methods: It is possible to connect only one lithium battery or multiple lithium batteries in parallel. The capacity of connected battery is no more than 200, 000 mAh, As long as the battery with a voltage of 3.0-4.2V can be used.
- Charge indication of this power bank pcb board: The word "IN" will be shown in the display; Output indication: Long press the LED button after turning on the load, Start output, The word "OUT" and the current and voltage of 5V 1.0A or 5V 2.1A will be displayed in the display.
- This is a mobile powerbank module with Protection Function: The protection circuit of the boosted lithium battery has been integrated, prevent over-discharge, over-charge, overload short circuit protection, over current protection, and over temperature protection. Note: The positive pole of the battery is connected to B+ and the negative pole is connected to B- do not reverse it. If it is reversed, it will burn out!
- Why can't continue charging when charging capacity is 99 ? You just assembled the battery, why the display percentage is not accurate, the battery power is only 50 , but it shows 80 after assembly? --Whether you are using a new battery or an old one all need to be discharged before use, then turn it off charge it once gain. If it still cannot be solved, it is caused by large internal resistance and inconsistent capacity.
Price Disclaimer
Product prices are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on amazon.com, amazonsupply.com, or myhabit.com at the time of purchase will apply to the purchase of this product.