UPC 702562172484

• Invisible fence is completely safe and harmless to your pet,if the dog is beyond the setting distance, The receiver collar will start up by a warning tone, then static shock until your dog comes back to "safety zone" ,An unlimited number of receivers supported at same time.Please install the transmitter 1.5 meters away from the ground and no metal wall, so as not to interfere with the wireless signal, affecting the remote control distance
• Receiver collar with automatic sleep function, lithium battery is 300 mA, standby time of about 12 hours, full of electricity normal use about 8-9 hours.Waterproof and rechargeable collar receiver,the collar fits dogs 8 pounds and up with neck sizes from 6 to 26 inches (Small/Medium/Large/Extra Large Dogs),The static mode of the collar is safe and harmless for your pet
• WIRELESS FENCE COVERAGE ADJUSTABLE - Level 1-100 Up To 500 meters radius at Max Setting,Do not touch the two screws on the collar before connecting the receiver and the transmitter, it is best to stuck the test light on the two studs before turning on the power, and if there is an electric light, do not touch the electric screw Will not be mistakenly touched by the electric shock

Features: 1.After the transmitter has lost power for any reason, the receiver is working for three cycles, the time is about 12 minutes, and the receiver stops working after 12 minutes.A reincarnation means: 3 minutes static & beep mode and 1 minute beep mode (1 minute only beep mode), like this 3 times after the receiver collar stops working. 2.The max. range is up to 500 meters and min. range is 20 meters from transmitter. 3.100 levels of intensity with no jump step for remote range adjustment. 4.Pulsed proportional stimulus--it is more close your dog gets to the boundary, then will be more intense. 5.Progressive tone stimulus--a warning tone first and then stimulate if your dog would not stop move to the boundary. Specifications: 1.Model: KD661 2.Color: White 3.Material: ABS(Acrylonitrile Butadiene Styrene) 4.Input: 100-240V/50-60Hz/0.35A 5.Ouutput: 5V/1A 6.Transmitter Size: 16.5x14x3.5cm 7.Receiver Size: 7x4x3.5cm 8.Strap Size: 73x2cm 9.Neck Circumference: 20-56cm 10.Waterproof Level: IPX6 11.Plug Type: US Plug Usage: Step 1: Turn on the transmitter by pressing ON/OFF button for 3 seconds. Step 2: Power Level Adjustment: press the button "+" or "-" for adjustment of tramsmitting power level, which will change s remote control range of this system. Press button "+" to increase the power level(The max. value is level 100.), press button "-" for level decreasin.(The min. value is 0.) Step 3: Make sure the transmitter is on, then press on/off button shortly to enter cording status. The screen will display "1dp" with flashing. Step 4: The transmitter must be powered by AC adapter, which the output is 5V/1A. Package Included: 1x Transmitter(The dog not included) 1x Receiver 1x Power Cord 1x Strap 1x User Munual 1x Operating Guide 1x Voltage Tester 4x Bark Stopper 2x Screws 2x Rubber Stopper