UPC 709238681998

• Hash Rate: 12.5TH/s ±5%
• Power Consumption: 1576W ±7% (Power supply sold separately)
• Built-in controller - No separate host computer required for operation.
• APW3 PSU recommended if you have 205-264v, otherwise EVGA 1600 G2

Hash Rate: 12.5TH/s ±5%. Power Consumption: 1576W ±7% at the wall (with Bitmain's APW3 PSU, 93 percent efficiency, 25C ambient temp). Power Efficiency: 0.126 J/GH at the wall (with Bitmain's APW3 PSU). Noise level: Loud. Chip quantity per unit: 171 x BM1387. Rated Voltage: 11.60 ~13.00V. Operating Temperature: 0C to 40C. Network Connection: Ethernet (cable not included). Notes: 1. Each AntMiner T9 has three 6-pin PCI-e connectors for 12V/15A DC STABLE input for the three hash boards and one additional 6-pin PCI-e connector on the controller. All TEN 6-pin PCI-e connectors are required. Do not connect more than one PSU to the same hash board to prevent possible damage and instability. 2. Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter. 3. Power supply unit is not included. The APW3 power supply is recommended if you have the required 205-264v, otherwise use the EGCA 1600 G2.