UPC 710525833365
Barcode for AR403 for WB2X9154 GE Roper Gas Range Oven Igniter AP2014008 PS243425
Scannable Barcode for UPC 710525833365
Sellers
| Marketplace | Price | Updated |
|---|---|---|
| $42.55 | 09/25/2021 03:06:40 GMT - Details |
Recently Searched
UPC 783087903197
Siemens 52BL4J3XB Heavy Duty Indicator Light, 30mm, Green, Plastic Lens, 480V AC Transformer, LED Bulb, Coated BlackMax, Watertight/Oiltight
Best Price: $86.54
View Product
UPC 695526868809
Leviton 2363 Locking Connector, 20A, 125/250V, NEMA L10-20R, Black/White
Best Price: $67.77
View Product
Attributes
| Attribute | Value |
|---|---|
| Brand | Eagleggo |
| Color | Silver |
| EAN | 0710525833365 |
| Manufacturer | Eagleggo |
| UPC | 710525833365 |
Description
- Gas Igniter for Stove Range, Replacement Part No. SGR403
- SPECS:This igniter's amperage range is 2.5 - 3.0. Used with 2.8 to 3.0 amp rated gas safety valves.The ignitor measures 3-1/2 long, one lead has a 1/4 female terminal the other is bare. 2 ceramic wire nuts included, This is a direct replacement for GE number WB2X9154, WB13K3, WB13K4, Fits many different range manufactured including Whirlpool, Kenmore, Roper.
- Includes: high temperature stainless steel shield, high temperature MGT wire leads, and high temperature ceramic wire nuts to wire into original harness. Replaces long and short ignitors. Be careful not to drop your new ignitor; ignitors are fragile and will break easily.
- Description:The oven igniter, also called a glow bar, heats up the bimetal switch and causes the oven to ignite the gas fed to the burners. A common issue when the oven fails to ignite is a faulty glow bar. If the oven does not start within 90 seconds, the glow bar is likely the issue. Do not be fooled if the glow bar turns red. If it does not reach the appropriate temperature, the oven will not light. If your ignitor uses a connector on the end, reuse the connector from the old ignitor.
- Description:Use your wire cutters to cut the wires on the old ignitor several inches above the connector. Strip the ends of the wires with a wire stripper. Place the end of a wire on the connector next to the end of a wire on your new ignitor. Use a ceramic wire nut to twist and hold the wires together. Your wires are not color coded, so it does not matter which wires are connected together. Your old ignitor can get very hot even if it doesn't ignite the burner tube.
Price Disclaimer
Product prices are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on amazon.com, amazonsupply.com, or myhabit.com at the time of purchase will apply to the purchase of this product.