UPC 713382813037

• 1080P Transmission -- This HDMI extender supports 1080P HD, HD Audio, 3D; It extends HDMI 1080P AV signal to at least 190ft/60m via single cat6 or higher level cables following standard IEEE-568B, For better performance, we suggest to use cable longer than 45ft/15m
• HDMI Lossless transmission -- It extends HDMI AV signal to synchronous output Video display is as fluent as direct connection, Adjust the specification automatically for different cable lengths 1-60m to achieve the best display
• Pure Hardware Transmission -- It is pure hardware design, No driver needed, plug and play. Adopt full HD transmission technology to make the video image more vivid
• IR Remote Control -- Support 20 60KHz wide Frequency IR signal transmission for controlling the source device, IR Emitter Cable and IR Receiver Cable are included
• Installation Requirements -- Requires one single cat6/6A/7 cable to connect TX and RX side. Suitable for HDMI source device; HDMI display device like SDTV, HDTV, sony/Epson/samsung projector with HDMI port; DON'T work for cable box; We stand by our products 100 with a 12-month warranty

Description: The HDMI extender over a single UTP cables with IR control is the right way to send your HDMI signal over long distances. Instead of using expensive HDMI cables, this device lets you use your existing Cat6/7cables/sockets while also performing the same functions like transferring Deep Color video and new lossless compressed audio. And if that weren't enough, you can use your existing remote to control your device through an IR blaster. Specification: HDMI signal: Comply HDCP Resolution supported: 480i 60Hz, 480p 60Hz, 576i 50Hz, 576p 50Hz, 720p 50/60Hz, 1080i 50/60Hz, 1080p 50/60Hz Network cable: Low resistance and consumption oxygen-free copper core CAT6 CAT6A CAT7 Transmission length: CAT6:60m at 1080P IR remote control: Support 20 60KHz wide frequency IR remote control Working temperature: 0 60 power: DC5V/1A power consumption: TX 2W RX Product size: 2.82 x 2.62 x0.98inch Package Contents: 1 x HDMI to RJ45 sender TX 1 x RJ45 to HDMI receiver RX 2 x DC5V/1A power 1 x User manual 1 x IR blaster extension cable 1 x IR receiver extension cable Note: 1.High quality cat6 or cat6a cable is needed to work with this hdmi extender, preferably longer than 15 meters/45ft or above 2.Only supports the PCM audio output 3.Do not mix up HDMI to RJ45 sender and RJ45 to HDMI receiver before installation. 4.Do not hot plug when it is working. 5.Make sure the cables in right connection. 6.Please press RX RESET button when no image output. 7.Please make sure the cables follows 568B and reset TX/RX to input HDMI Signal when RX"LINK" Led is flashing all the time.