Scannable Barcode for UPC 721678690033
Sellers
| Marketplace | Price | Updated |
|---|---|---|
| $39.55 | 03/31/2023 13:55:26 GMT - Details |
Recently Searched
UPC 859678005479
KUS CPFR-WS, 240-33 Ohm, Electric Fuel Level Gauge, 12V / 24V, 2" with Backlight
Best Price: $34.18
View Product
UPC 046074032240
AUTO METER 3224 Copper Tubing
Best Price: $11.28
View Product
Attributes
| Attribute | Value |
|---|---|
| Binding | Unknown Binding |
| Brand | PmoYoKo |
| Color | Green |
| EAN | 0721678690033 |
| Manufacturer | PmoYoKo |
| Model | PH-9908 |
| MPN | PH-9908 |
| UPC | 721678690033 |
Description
- 4-in-1 pH Meter pH meter has a four-in-one function, which can measure EC, PH, TDS and temperature with high precision at the same time. All-round measurement of water quality to ensure healthy water quality.
- ATC Function pH Meter The pH meter has an automatic temperature compensation function, which can be adjusted according to the water temperature and water quality. So you do not need to care about the temperature of the liquid being measured.
- High Accuracy Water Tester High-accuracy algorithm chip and electrode of our digital ph meter ensure accurate and fast response. One-button lock reading function helps lock reading even if the tds meter is taken out of the sample!
- IP67 Waterproof Grade pH Meter The pH meter is IP67 waterproof grade to prevent the product can not be used after accidentally falling into the water or other solutions.The battery cover is equipped with a waterproof line, but when this issue happen, pH meter should be taken out immediately because soaking the product long time may cause product damaged and can not be used normally.
- Easy to Read TDS Meter The pH meter with Green Backlit LCD helps to read the EC, PH, TDS and TEMP at odd angles and in low light. Press the HOLD/TEMP key to lock the reading, which helps to easily record readings.
- How to calibrate the pH Meter/TDS Meter? 1. Add pH4.00/pH6.86/pH9.18 buffer powder into water and stir it; 2. Press the ON/OFF button and adjust to pH mode. Put the electrode into pH4.00/pH6.86/pH9.18 standard solution and wait 5 10 seconds; 3. Press and hold the MODE/CAL button and release after 6 seconds; until pH4.00/pH6.86/pH9.18 readings are no longer flashing, finish the pH calibration.
Price Disclaimer
Product prices are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on amazon.com, amazonsupply.com, or myhabit.com at the time of purchase will apply to the purchase of this product.