UPC 722737102436

• Dashboard for XIAOMI M365 Electric Scooter Circuit Board
• Note: If you don't know how to connect to the app, please see the product image. There are steps to connect the app in the picture.
• When you replace the new dashboard, please connect the dashboard with the throttle and the electronic brake first. If there is no connection, then connecting to the APP may fail.
• Before you order this Bluetooth circuit board, please confirm whether the fault of your main controller is causing the Bluetooth version to be damaged. Only the Bluetooth board is damaged, not the main controller is damaged, you can directly replace it.
• If the main controller has been damaged, we advise that your controller and bluetooth circuit board must be replaced with the original one at the same time. Otherwise the main controller will cause the Bluetooth circuit board damage again.

Installation Steps: 1. Take off the stock display covers . 2. Remove the screw at the bottom of the panel. 3. Inspect our display and make sure everything looks good after transit. 4. First, install the connector. Make sure pins are aligned correctly . Insert the connector and install the screw you have removed in step 2. Press the blue button and make sure the screen lights up and works properly as per pictures. 5. Remove adhesive tape which came with our unit. Put on the new display panel and make sure it's fully inserted in place. Watch out for connector cables! 6. Insert button and light extensions to your bottom panel cover. 7. Reapply the bottom panel cover you removed in step 1. Package Contents: 1 Installation Instructions 1 Original M365 Bluetooth Circuit Board 1 Clear Screen Cover 1 Screwdriver 1 Set of Screws , Important Warning: Only the Bluetooth board is damaged, not the main controller is damaged, you can directly replace it. Before you order this Bluetooth circuit board, please confirm whether the fault of your main controller is causing the Bluetooth version to be damaged. If yes, We advise that your controller and Bluetooth circuit board must be replaced with the original one at the same time. otherwise the main controller will cause the Bluetooth circuit board damage again.