UPC 730052062342
Barcode for Rega 3-Point 2mm Required Arm-Height Spacer for Rega Table with Non-Rega Cartridge
Scannable Barcode for UPC 730052062342
Sellers
| Marketplace | Price | Updated |
|---|---|---|
| $39.00 | 02/15/2021 15:00:13 GMT - Details |
Recently Searched
UPC 705333158311
Rega Genuine OEM Dustcover for Planar 8 and Planar 10 Turntables
Best Price: $175.00
View Product
UPC 723800045155
Rega - RB78 Mono MM Cartridge Designed Specifically for 78rpm Playback
Best Price: $165.00
View Product
Attributes
| Attribute | Value |
|---|---|
| Binding | Electronics |
| Brand | REGA |
| EAN | 0730052062342 |
| Manufacturer | Rega |
| UPC | 730052062342 |
Description
- Some other manufacturers cartridges may have a deeper body than Rega cartridges, these will sometimes require the use of the three point spacer to allow clearance of the rear of the cartridge from the vinyl.
- When Rega arms are fitted to turntables from other manufacturers it may be necessary to add our Rega arm spacers to achieve the correct arm height.
- Note: On Rega turntables spacers should not be necessary unless you are you using an exceptionally deep bodied cartridge from anotherr manufacturer.
- Arm height or V.T.A adjustment can be a controversial subject. Rega believes that the integrity of the arm fixing onto the arm mounting board is much more important than the questionable facility of arm adjustment. The arm should be reasonably parallel to the record surface or slightly lower at the mounting. The only time a spacer is necessary to raise the arm height is if the rear of a cartridge is hitting the record whilst playing.
- 3-point, 2mm thick
Price Disclaimer
Product prices are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on amazon.com, amazonsupply.com, or myhabit.com at the time of purchase will apply to the purchase of this product.