UPC 730052062601

• The Neo PSU is an advanced turntable power supply providing user controllable fine speed adjustment, advanced anti-vibration motor circuit and the convenience of electronic speed change. The Neo will make a welcome addition to any compatible Rega turntable by reducing motor noise, improving speed stability and rotational speed accuracy.
• The Neo PSU is compatible with the following Rega turntable models: P3-24 / RP3 / Planar 3 2016 / RP6 / P5 / P7 / RP40 special edition / RP8 Or any older Rega turntable fitted with our aftermarket 24v motor upgrade kit.
• Using the same DSP generator found in the RP10 the Neo is built upon a high stability crystal. The Neo features an advanced anti vibration circuit, fine motor speed adjustment and the convenience of electronic speed change. The DSP generator will divide the accurate signal from the crystal to the exact frequency required to turn the platter at the selected speed whilst will producing a near perfect sinusoidal waveform to drive the 24v motor.
• Output to motor bi-phase 24 V AC protected by resettable fuse. Power consumption 7.2 W Voltage 24 V AC Power supply: Rega PS1 only. Speed control step size 0.01 RPM. PS1 Input 230 V 50 Hz 0.07 A Output 24 V 350 mA AC PS1 Input 230 V 50 Hz 0.07 A Output 24 V 350 mA AC PS1 Input 115-120 V 60 Hz Output 24 V 350 mA AC PS1 Input 230 V 50 Hz 0.07 A Output 24 V 350 mA AC PS1 Input 100 V 50/60 Hz Output 24 V 350 mA AC PS1

The Neo PSU is an advanced turntable power supply providing user controllable fine speed adjustment, advanced anti-vibration motor circuit and the convenience of electronic speed change. The Neo will make a welcome addition to any compatible Rega turntable by reducing motor noise, improving speed stability and rotational speed accuracy. The Neo PSU is compatible with the following Rega turntable models: P3-24 / RP3 / Planar 3 2016 / RP6 / P5 / P7 / RP40 special edition / RP8 Or any older Rega turntable fitted with our aftermarket 24v motor upgrade kit. Using the same DSP generator found in the RP10 the Neo is built upon a high stability crystal. The Neo features an advanced anti vibration circuit, fine motor speed adjustment and the convenience of electronic speed change. The DSP generator will divide the accurate signal from the crystal to the exact frequency required to turn the platter at the selected speed whilst will producing a near perfect sinusoidal waveform to drive the 24v motor.