UPC 738634052019
Barcode for ElecGear M.2 2280 SSD Cooler, Aluminum + Copper Heatsink with 4Pin PWM Cooling Fan for 80mm PCIe NVMe or SATA NGFF M2 SSD Internal Solid State Drive, Thermal Pads Included
Scannable Barcode for UPC 738634052019
Sellers
| Marketplace | Price | Updated |
|---|---|---|
| $17.98 | 03/16/2022 20:19:11 GMT - Details |
Recently Searched
UPC 722737390581
Repair Parts Cooling Fan for DJI Mavic 2 Pro Mavic 2 Zoom
Best Price: $28.99
View Product
UPC 789264252331
Castle Creations 011-0015-00 Case, Mamba Max Pro with Fan
Best Price: $12.99
View Product
Attributes
| Attribute | Value |
|---|---|
| Brand | ElecGear |
| EAN | 0738634052019 |
| Manufacturer | ElecGear |
| Model | EL-2280C |
| MPN | EL-2280C |
| UPC | 738634052019 |
Description
- 2280 Heatsink Cooler Based on a pure copper plate, the aluminum alloy forms an enclosed cavity with one end open. This pipeline design effectively transfers the heat from M.2 SSD to the heatsink. The heat accumulated will be driven away by the built-in cooling fan. 12 to 25 degrees Celsius drop is expected. Your memory will never be over-heated again. NVMe and SATA are supported
- PWM Cooling Fan Equipped with a mini-sized cooling fan . 4-wires PWM controlled by the socket on the motherboard. Low noise level with max rate at 10KRPM. Please fine set the fan control strategy in the BIOS at a right balance between the temperature decrease and the noise level. A splitter adapter cable included supports both 3-Pin and 4-Pin cooling fans
- Thermal Pads 3 pieces of thermal pads for excellent heat dissipation. The single-sided pad in pink is to paste onto the middle frame facing against the bottom of the SSD. Choose to apply the pre-divided small chips onto the memory chips and the main control chip, or simply paste the whole slice of the silicon pad to the upper surface of the 2280 M.2 SSD
- Compatibility Note The cooler fits NVMe and SATA SSD in 80mm M.2 form factor alone. The memory can be single-sided or double-sided. You can position the assembly in two directions to match the airflow of the PC chassis. Please make sure your desktop PC has enough space for this kit: Minimum width is at least 24mm, and 10mm height above the SSD
- What's in Package 1 Heatsink with PWM cooling fan inside, 1 Single-sided Thermal Pad in pink for the bottom, 1 Thermal Pad in blue , 10 Small Thermal Chips for memory chips, 1 Splitter Cable for PWM fan , Screws and Screwdriver
Price Disclaimer
Product prices are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on amazon.com, amazonsupply.com, or myhabit.com at the time of purchase will apply to the purchase of this product.