Scannable Barcode for UPC 746713696108
Sellers
| Marketplace | Price | Updated |
|---|---|---|
| $19.99 | 03/05/2024 17:37:15 GMT - Details |
Recently Searched
UPC 669263380139
ApexMaker 5PCS Screen Protector 9.25 inch For LCD Resin 3D Printers, Screen Protector Film Original LCD Screen Protective Film for Anycubic Photon Mono X 6K, M3 Plus 9.25 inch Mono Resin 3D Printers
Best Price: $13.69
View Product
UPC 797424772889
MOTOU 202 128mm Resin 3D Printer Flex Build Plate, Magnetic Base Platform for Anycubic Mono X Photon X & Smart Kumitsu KL9 & ELEGOO Mars4 Max & Phrozen Sonic Mighty 4K
Best Price: $19.99
View Product
Attributes
| Attribute | Value |
|---|---|
| Brand | Aladrs |
| Size | 202x128mm(Saturn S) |
| EAN | 0746713696108 |
| Manufacturer | Aladrs |
| MPN | ALA-3D-045 |
| UPC | 746713696108 |
Description
- Applicable model: 202x128mm is made for Photon Mono X, Mono X 6K, M3 Plus, Saturn S.This resin magnetic flexible steel plate flex bed is also can used for the plate 's size which is longth between 202-212 mm, the width between 128-138mm.
- High durability:Flexible steel plate with high chromium content, easy to bend and clean. Much easier to remove prints and avoid damages during the process, especially for small prints. Good corrossion resistance and prevent rust. Brushed surface provides better adhesion, ensure a perfect print. At the same time, after installing the magnetic printing platform, you will need to re-leveling the 3D printer for excellent printing results.
- Easy to operate: Traditional DLP light-curing printer platforms must use tools to disassemble, while this resin flexible board can be disassembled by bending. Easier removal of printed models from the resin build surface. Makes it easier to remove prints and avoid damage in the process, especially for small prints.
- Clever design: The magnetic printing platform is equipped with a handle that makes it easy to install and remove the magnetic printing platform.
- Installation method: Thoroughly clean and dry the printing platform plate, attach the magnet to the printing platform plate and let it sit for a while to fully seat it, install the spring steel plate on the magnetic base again, and finally reset and level the printer. Set to start printing. It is recommended to print 3.8mm thick spacers to facilitate the normal zeroing of the Z axis.
Price Disclaimer
Product prices are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on amazon.com, amazonsupply.com, or myhabit.com at the time of purchase will apply to the purchase of this product.