UPC 748926426411

• TRANSMITTER + RECIEVER: One portable adapter to use as either transmitter or receiver, powered by the latest Bluetooth 4.1, can pair with two headphones / speakers at once.
• OPTICAL + 3.5mm: You get maximum flexibility with support for both 3.5mm and optical digital, both input and output are supported.
• LOW DELAY: aptX Low Latency technology eliminate Bluetooth audio delay, so you can watch TV / Movie / Video and listen to high-clarity sound in perfect synchronization. Note: aptX Low Latency ONLY supports TX mode.
• CONSTANT STREAMING AND AUTOMATIC RE-PAIRING: Internal battery provides up to 15 hours of using, support charging and streaming at the same time, and automatically re-pair with existing paired devices.

Connect to TV via Digital Optical Audio Out, 1. Find the Digital Optical Audio Out jack on your TV. 2. Connect the transmitter TT-BA09 to your TV via the Digital Optical Audio Out jack using the digital optical cable. 3. Pair the transmitter TT-BA09 with your Bluetooth Headphones/Speakers. Connect to TV via AUX / RCA Audio Out, Once the transmitter is connected to Bluetooth stereos, the blue LED indicator will remain on. If there's no sound coming out from your stereos, please kindly have a check see if you have plugged the unit into the Audio Output jack on your TV, Pair with two Bluetooth headphones / speakers simultaneously, 1. Turn on your speaker/headphones A and the transmitter, place them into pairing mode . Make sure they pair with each other successfully. 2. Turn off the Bluetooth of the speaker/headphones A and turn on speaker/headphones B. Then tap the Power Button twice of the transmitter to pair and connect to your speaker/headphones B. Also make sure they pair with each other successfully. 3. Turn on the Bluetooth of speaker/headphones A. In approximately 30 seconds, it will automatically connect in. And now the audio will be transmitted to both speakers/headphones. Note, 1. If the transmitter could not pair with the headphones/speakers successfully, please kindly reset both the transmitter and the headphones/speaker. 2. The transmitter is supported to aptX Low Latency codec, aptX Low Latency supported headphones/speakers are also required for the audio to be encoded via this codec. What is in the Box: 1 x TaoTronics Bluetooth 5.0 2-in-1 Adapter , 1 x 3ft Digital Optical TOSLINK Cable / 50cm Audio Cable , 1 x 3.5mm 1.64ft / 50cm Audio Cable , 1 x 3.5mm Female to 2 RCA Male Cable, 1 x USB Charging Cable,