Scannable Barcode for UPC 753318593381
Sellers
| Marketplace | Price | Updated |
|---|---|---|
| $84.99 | 12/21/2021 12:18:44 GMT - Details |
Recently Searched
UPC 701851960146
Adafruit 1947 Touch Shield, 2.8" TFT for Arduino with Capacitive Touch
Best Price: $44.49
View Product
UPC 769749575575
Donald Trump Gold Commemorative Coin Second Term of The President 2021-2025 in God WE Trust Collector Coins
Best Price: $15.99
View Product
Attributes
| Attribute | Value |
|---|---|
| Brand | AURSINC |
| EAN | 0753318593381 |
| Manufacturer | AURSINC |
| MPN | 2020083101 |
| UPC | 753318593381 |
Description
- 2021 Upgraded Version: ESD Protection Diodes Tinysa with latest firmware V0.3.1, the displayed version info is "ESD protected" meaning the diodes are installed which will be more stable and sensitive with higher antistatic level and longer service life. Spectrum Analyzer with two inputs, high quality MF/HF/VHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz. Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz
- Frequency Range Spectrum analyzers like the tinySA use a resolution filter that is used to isolate the input power in a small frequency range. This resolution filter is swept across the desired frequency range. The fastest scanning speed occurs with an RBW or 300kHz or wider and is about 2 scans per second. But with increase of the frequency span and decrease of the RBW the scanning speed decreases quickly. A scan from 0MHz to 350MHz with an RBW of 10kHz takes about 2 minutes.
- 2 in 1 Device When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator that is used for automatic self test and low input calibration. The tinySA contains all the components of a conventional heterodyne swept spectrum analyzer. Color display showing 290 scan points covering up to the full low or high frequency range
- 4 Input/Output Spec Modes The input/output specification of the tinySA is split over the 4 modes: Low input mode, High input mode, Low output mode, High output mode. The firmware of the tinySA can be updated by the user. New versions of the firmware needed please contact seller for download link
- PC Control The USB interface implements the Serial over USB protocol and there is a large set of commands that can be invoked over the serial interface. These command can be used to perform measurements or update internal settings. The driver for Windows will install automatically after connecting to a Windows PC. The driver for Linux is built into the kernel. Two softwares to control the tinySA are available. Both are able to capture the screen of the tinySA
Price Disclaimer
Product prices are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on amazon.com, amazonsupply.com, or myhabit.com at the time of purchase will apply to the purchase of this product.