UPC 754610400407

• https://www.youtube.com/watch?v=wtAjcVV22-I&feature=youtu.be
• Strapping thickness: 0.5(0.0196")-1.2mm(0.047")
• Max strap tension Max. 3500N Strapping material: Polyester
• Applications: PET strap, PP band
• Strapping width 13mm(1/2")-19mm(3/4")

Principle of Friction Instruction: 1)The compressed air will push the piston within air cylinder. The upper part of piston and vibrating bar is connected with the rocking pin, so the vibrating bar will press the lapped part of packaging belt when moving down.

 2)There is an elliptic hole at the center of vibrating bar. This hole is connected with the eccentric shaft of pneumatic motor. The pneumatic motor rotates at a high speed (10000rpm), so the vibrating bar conducts reciprocal motion quickly. The lower part of packaging belt is fixed by the peg teeth of fusion toothed plate, and its upper part is driven by the peg teeth of vibrator for strenuous friction. Hence, the lapped part of packaging belt is fused by the heat produced by friction. When the vibration timer reaches the set time, vibration stops and fusion completes.

 3)Both upper and lower parts of the packaging belt are stuck while extruding. 

Safety Instructions: 1.Bear in mind "safety-foremost" principle, and operate this pneumatic tool properly; 

2.Read the Manual carefully before operation; 

3.Don't dismantle safety parts of the tool; 

4.Don't tear or damage label or mark of the product; 

5.Don't put hand or other part of your body between packaging belt and packaging tool. 

Item Included: 1 Set of Handheld Pneumatic Strapper (151030)