UPC 761710154772

• This rig set is assembled by three parts, the quick release follow focus and front mattebox and the 15mm rail rod plate, all are our DP500III series product made of sturdy metal and process by CNC mechine
• The follow focus of this rig set is quick release and A/B hard stop, also the gear can be installed on both side, with A/B hard stops, it's easy to make begin/end setups for fast repeatable shooting between two points. It also makes focusing lenses that have no hard stops much easier. The white mark ring is made of magnet material, very convenient to be detached or attached on the metal follow focus. You can also buy additional mark ring
• The front matte box can be open at the position 90 degree, so you can easily intsall or take off the lens or follow focus parts, or the camera, also the height of the mattebox is adjustable, give a high tolorance of the installnation, and there a 2 filter tray for 4x4 filter, 6 donuts for different lens
• The rail rod plate of this rig set is transformable, it can be installed as a shoulder pad or the C sharpe camera cage, the base of rail rod plate with the 3/8 and 1/4 screw holes, so you can install the rig on the tripod or slide track, also the quick release plate is height adjustable.
• The tubes are inner screw, so you can extend the set with extra tubes.

Specifications: Material: sturdy metal, Compatible with industry standard follow focus whip or crank. Mounts onto industry standard 15 mm rod support :60mm center to center, MOD drive gear: industry standard 0.8.can work with different size gear to meet you need with different lens. Length of the rail rod of 250mm+150mm, Quick release plate:70x37mm, Height adjustable range of lens support mount:0 20mm, Height adjustable range of quick release plate:0 15mm, Hright adjustable range of matte box:0 10mm, Package : 1 DP500III Follow focus, 0.8 43T Gear, 46 to 110mm flexible gear belt, 1 DP500III Mattebox with donuts, 1 DP500III Rig rail rod plate camera cage