UPC 781573469950

• SHA256 Mining Hash Rate: 13.5TH / s 5
• Lower Power Consumption: 1310W 10
• Built-in Web Management Portal - No separate host computer or software required
• Most Power Efficient Bitcoin Miner: 0.097 J / GH 10
• Better and Cheaper than Old series Antminer S9, AntMiner APW7 power supply recommended

APW7 POWER SUPPLY & 15ft C13 HEAVY DUTY POWER CORD ARE NOT INCLUDED , Warning: Must have 220v-264v power to run! If you only have 110v-120v power , then you cannot reliably power the AntMiner S9i with a single APW7. We recommend using 2 APW7 PSUs together when using 110v-120v power sources. Specifications: 1. Hash Rate: 13.5 TH/s 5 , 2. Power Consumption: 1310W 5 , 3. Power Efficiency: 0.097 W/GH 7 , 4. ASIC Chip: 189 x BM1387, 5. Dimensions: 350mm 135mm 158mm, 6. Cooling: 2x 12038 fans, 7. Network: Ethernet cable is not included, Notes: 1. Due to the nature of these products, there are higher than normal restocking fees . The restocking fees are typically waived in the event that there is a provable failure within the first 30 days and the warranty has not been voided by overclocking. In the event that you experience a failure, please reach out to the seller immediately so that we can begin troubleshooting with you and/or processing a replacement. 2. The AntMiner S9i requires TEN 6-pin PCI-e connectors. There are three hash boards that each require THREE 6-pin PCI-e power connectors and one additional 6-pin PCI-e power connector on the controller. All TEN 6-pin PCI-e power connectors are required. Do not connect more than one PSU to the same hashing board! 3. Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter. 4. Very LOUD! Sounds like a whiny vacuum. 5. Metal clanking or rattling is expected when moving the AntMiner S9i. The sound is from the hashing boards moving back and forth against the metal frame. This does not mean there are loose parts and does not mean the item is defective.