UPC 781810033395

• Permits final inspection of connector before completing crimp cycle
• Extra supply hydraulic fluid 8-quart reservoir
• Full automatic or manual jog and hold cycles
• Operator safety with power loss "smart circuit", freezes unit in event of power disruption
• Method of operation desired is permitted with 3-position selection switch

Burndy EPAC series electric/hydraulic pump, air control. The EPAC6 electrically driven hydraulic pumps feature exclusive automatic or manual "jog and hold" operation control provided by a unique air control switch, which provides the safest operation method of any pump available. The automatic mode advances the remote tool into a "hold" position without crimping the connector so the operator can inspect the orientation before completing the crimp. Once the crimp is completed, the pump auto matically turns the pump off, allowing the retraction of the remote tool and resets itself for the next operation. The manual position allows the operator to jog the tool forward without the tool ram retracting. To retract the tool prior to completing the crimp, turn the control switch to "off", the pump will stop and the tool will retract. In the manual mode the pump advances only while the control is being depressed. To complete a crimp, squeeze and hold the air control switch until the pump reaches the preset pressure and shuts off. Roll cage. 3 position switch and control box. Factory set output pressure. Quick disconnect hydraulic coupler. Oil level window. 8 quart reservoir. Permits final inspection of connector before completing crimp cycle. Extra supply hydraulic fluid 8-quart reservoir. Full automatic or manual jog and hold cycles. Operator safety with power loss "smart circuit", freezes unit in event of power disruption. Method of operation desired is permitted with 3-position selection switch. Safety is provided against hazardous shock with airbulb actuator and air line. Saves time with quick disconnect hydraulic fitting. Windows allows easy inspection of proper oil level. High quality crimps are achieved with built-in factory set pressure release valve. 5-year limited warranty. Motor: 1/2 HP 115/230 VAC, 60 Cycle. Maximum current draw: 10 amperes. Reservoir volume: 8 quarts maximum, 2 quarts minimum. Height: 17-1/2-inches. Base: 11-3/4-inches by 18-1/2-inches.