UPC 786132333437

• Automatically Control: The lowest water level the pump can get is 2 inch. When the water level 8 inch, you can keep the float switch hang on and continue to pump to 2 inch.when the water level is below the initial level, it will automatically disconnect the power and stop working;When the water level rises above the initial level, the pump will start working, automatically under the control of float switch.
• Three Outlet Sizes: Three fittings with different diameters for outflow to choose from according to the flow rate. The bigger the flow is, the wider the outlet should be.
• Parameter: Power: 1100W; Voltage: 110V 60Hz; GPH: 3400; Head Max: 5M. Pump Full Size: 17 x 15 x 31cm/ 6.6 x 5.9 x 12.1inch ; Switch Size: 10 x 7.5 x 3.8cm/ 3.9 x 2.9 x 1.5inch; Output Tie-in Diameter: 2cm/ 0.8inch
• Structure Detail - The height of base is 5 mm, if the machine is applied in the water with impurities whose diameter is more than 2mm, it will do harm to the pump. Air vent on the back of the pump help deal with the pumping with higher efficiency.
• Great for flooded area, swimming pool, pond. Never worried again your basement will be flooded with dirty water during rainy days. Our products are all in US warehouse, you can get it in 3-8 days!

, This portable sump pump is a necessity of every house. Never worry again that your dry basement will be effected on rainy days or any day that the underground water table rises. Submersible sump pumps sit in a water-accumulating sump pit, they pump all excess water away from the house's foundation - Portable, does not have to be permanently installed. The purchase of this sump pump will save any homeowner thousands of dollars by preventing water in the home's basement , Material: Plastic , Color: Blue , Power: 1100W , Voltage: 110V 60Hz , GPH: 3400 , Applications: Garden, Yard , Head Max: 5M , Item Weight: 3.3KG , Ideal for: Garden, Yard, Home , Package content: 1 x Water Pump, 1 x Manual , Notice: 1) When the pump can't pump any water, you must cut off the power in case that the motor is burned out. 2) The maximum diameter of the particles must be less than 0.078inch in case it is blocked. Cleaning Method: 1) Cleaning Externally: Rinse with clean water. Remove stubborn contamination with a brush and detergent.Submerge the pump in a container with clean water and switch on for a short time to rinse the inside of the pump. 2) Cleaning the Suction Area: clean all accessible insides of the casing. Remove fibres which have wound around the rotor shaft by opening the pressure connection. Remove stubborn contamination with a brush and detergent.