upc 791809145909 image

UPC 791809145909

Barcode for Hahiyo 0.8mm Extruder Nozzles Quality Brass Quick Heat Pointed Print Heads Quick Switching High Compatibility 10 Pieces for 3D Printer

Scannable Barcode for UPC 791809145909

scannable barcode image

Sellers

Marketplace Price Updated
$8.99 02/02/2023 08:59:10 GMT - Details

Recently Searched

UPC 814358015858

Genuine E3D Hardened Steel V6 Nozzle - 1.75mm x 0.60mm

Best Price: $21.32 View Product

UPC 609301976016

3D Printer Nozzle, ExcelFu 16 Pieces Stainless Steel 3D Printer Nozzles 0.2 mm, 0.3 mm, 0.4 mm, 0.5mm, 0.6 mm, 0.8 mm, 1.0 mm Extruder Nozzle Print Head for E3D Makerbot

Best Price: $9.99 View Product

Attributes

Attribute Value
Binding Unknown Binding
Brand HAHIYO
EAN 0791809145909
Manufacturer HAHIYO
Model 2021012004-3D Nozzles
MPN 2021012004-3D Nozzles
UPC 791809145909

Description

  1. Filament feeds through nicely:Normal nozzles will clog and wear over time, but our nozzles are made very clean to pervent burrs or rough edges.Holes centered and correct size.Inside is straight bored, no annoying wavy path like you see in the others.These will save you from issues with clogging or print accuracy.You will pleasantly surprised by the smoothness of the prints instead of a rough look.
  2. Accurate printing:After replacing these nozzles on, you can get a pretty consistently print and you can even did a poly vase to test right after you put them on.These will fulfill the job without requiring a recalibration of flow rate from time to time.If you want good finish ,proper sizing, and proper alignment, here is the nozzel that meets your expectation.
  3. Quick switching:When you're printing is no time to go picking and trying to clear the nozzel.It will be great if you able to switch out nozzles quickly and easily instead of taking the time to scrape off every single bit of melted plastic.It's always easier to just change out the nozzle than troubleshoot any print issues related to the nozzels, and them being so well-made makes it easier to do so.
  4. Quality brass nozzles:High quality brass gives a smooth and shiny finish to it.It can be used to print PLA, ABS and mostly other non-abrasive materials.It also helps you to install them on the hotend with ease and gives you confidence with their operation.You can easily heat it up to 90 degrees so that the previous residues could come off, it is such practical material for the nozzle!
  5. High compatibility:Always make sure you order the right one for the particular size of the 3D printer.This extruder nozzles is compatible with all 0.8mm wide printing project.It will fit different printers that use the same type of 1.75mm thread sizes.They will work fine even you are a rookie for 3D printing, and also being able to simply removing or installing this beautiful nozzle.

Reviews

Be the first to write a review.

Searching: