UPC 791974135194
Barcode for Dixell XR20CX-5N1C1 230V/50-60Hz Digital Thermostat Controller Off Cycle Compressor Defrost Programmable-Commercial for Refrigeration
Scannable Barcode for UPC 791974135194
Sellers
| Marketplace | Price | Updated |
|---|---|---|
| $82.99 | 07/03/2023 23:04:58 GMT - Details |
Recently Searched
UPC 652592067413
THERMASOL MTC-SN Microtouch Controller Contemporary-Satin Nickel
Best Price: $589.80
View Product
UPC 652592068229
THERMASOL MTMR-PN Microtouch Controller Modern Recessed-Polished Nickel
Best Price: $591.50
View Product
Attributes
| Attribute | Value |
|---|---|
| Brand | Dixell |
| Color | Gray |
| EAN | 0791974135194 |
| MPN | Dixell-0119 |
| UPC | 791974135194 |
Description
- It is a digital thermostat with off cycle defrost designed for refrigeration applications at normal temperature.It provides a relay output to drive the compressor.Suitable for appliances including:for refrigeration applications at normal temperature.
- COMPRESSOR:The regulation is performed according to the temperature measured by the thermostat probe with a positive differential from the set point: if the temperature increases and reaches set point plus differential the compressor is started and then turned off when the temperature reaches the set point value again. In case of fault in the thermostat probe the start and stop of the compressor are timed through parameters COn and COF.
- Defrost is performed through a simple stop of the compressor. Parameter IdF controls the interval between defrost cycles, while its length is controlled by parameter MdF.
- SAFETY PRECAUTIONS Check the supply voltage is correct before connecting the instrument. Do not expose to water or moisture: use the controller only within the operating limits avoiding sudden temperature changes with high atmospheric humidity to prevent formation of condensation. Warning: disconnect all electrical connections before any kind of maintenance. Fit the probe where it is not accessible by the End User. The instrument must not be opened.
- In case of failure or faulty operation send the instrument back to the distributor or to Dixell S.r.l. with a detailed description of the fault. Consider the maximum current which can be applied to each relay . Ensure that the wires for probes, loads and the power supply are separated and far enough from each other, without crossing or intertwining.
Price Disclaimer
Product prices are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on amazon.com, amazonsupply.com, or myhabit.com at the time of purchase will apply to the purchase of this product.