UPC 791974135200
Barcode for Dixell XR30CX-5N1C1 Digital Thermostat Controller Off Cycle Defrost AUX Relay 230V/50Hz-60Hz Programmable-Commercial for Refrigeration
Scannable Barcode for UPC 791974135200
Sellers
| Marketplace | Price | Updated |
|---|---|---|
| $87.99 | 07/03/2023 23:04:54 GMT - Details |
Recently Searched
UPC 024847592269
Generac 197279GS Control Board Genuine Original Equipment Manufacturer Part
Best Price: $260.95
View Product
UPC 768488579851
WS2812B WS2811 WS2815 SK6812 SP107E Smart Music Bluetooth Full Color Controller iOS/Andriod App Control Support Almost All The LED IC Chip Suit for LED Strip, Matrix Panel, DC5-24V
Best Price: $21.90
View Product
Attributes
| Attribute | Value |
|---|---|
| Brand | Dixell |
| Color | Gray |
| EAN | 0791974135200 |
| MPN | Dixell-0120 |
| UPC | 791974135200 |
Description
- It is a digital thermostat with off cycle defrost designed for refrigeration applications at normal temperature. It provides two relay outputs, one for the compressor, the other one can be used as light, for alarm signalling or as auxiliary output.
- The regulation is performed according to the temperature measured by the thermostat probe with a positive differential from the set point: if the temperature increases and reaches set point plus differential the compressor is started and then turned off when the temperature reaches the set point value again. In case of fault in the thermostat probe the start and stop of the compressor are timed through parameters COn and COF.
- Defrost is performed through a simple stop of the compressor. Parameter IdF controls the interval between defrost cycles, while its length is controlled by parameter MdF.Case, XR30CX frontal 32x74 mm; depth 60mm;
- SAFETY PRECAUTIONS Check the supply voltage is correct before connecting the instrument. Do not expose to water or moisture: use the controller only within the operating limits avoiding sudden temperature changes with high atmospheric humidity to prevent formation of condensation. Warning: disconnect all electrical connections before any kind of maintenance. Fit the probe where it is not accessible by the End User. The instrument must not be opened.
- In case of failure or faulty operation send the instrument back to the distributor or to Dixell S.r.l. with a detailed description of the fault. Consider the maximum current which can be applied to each relay . Ensure that the wires for probes, loads and the power supply are separated and far enough from each other, without crossing or intertwining.
Price Disclaimer
Product prices are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on amazon.com, amazonsupply.com, or myhabit.com at the time of purchase will apply to the purchase of this product.