UPC 796358200710

• Can be applied: methanol diesel gasoline kerosene liquid water
• 1 inch female stainless steel, digital display, easy installation
• Flow range 10-100L/MIN /Measurement accuracy 1 /Repeatability 0.5
• Digital display: single counting 0.00-9999.9/total number of accumulated 0.00-99999.9
• Multiple unit switching display L/GAL/PTS/QTS/

K24 turbine flow meter: Medium: Methanol Diesel Gasoline Kerosene Liquid Water, 1 inch internal thread, Length: 103MM, Measurement accuracy 1 , Repeatability 0.5 , Working pressure 10BAR, Standby time 2 years, Flow range 10-100L/MIN, Single counting 0.00-9999.9, The total number of accumulated 0.00-99999.9, Units of measurement l/L, gallons/GAL, pints/PTS, quarts/QTS, Single metering cleared, 1 .How to set the Measurement unit? In standby mode, or the currently displayed mode, press the MENU + RESET key for 5 seconds at the same time. Entering the unit conversion settings, press RESET button, sorted by LTR PT QT GAL LTR select a unit of measurement, and add the cumulative amount according to the current measurement unit conversion display. Press the MENU key again for 3 seconds, Finally exit the unit conversion settings. 2 . Calibration of Error coefficients, In standby mode, or the currently displayed mode, press the MENU key for 3 seconds, enter into Calibration of Error coefficients mode. While the first digit flashes, press MENU button, the digital shift, Press RESET button, modify the value of the current Flash, and from 0 to 9 and then to 0. When this data up, the output oil is less; when the data drops, the output oil is more. Press the MENU button 3 seconds end error coefficients ' calibration. Return to displaying the current charging status, and is currently filling the display to zero. After the error coefficients ' calibration, if new measurement pulse input, use new error coefficients of calibration. Error coefficients ' calibration range: 0.1000-9.9999. Press the MENU +RESET button, view the coefficients and the total cumulative,