UPC 796391551275
Barcode for RGB LED Light Strip Remote Controller, Walwee 4 Pin 2 Ports Output Dimmer with 44 Keys Wireless IR Remote Control Receiver for 5050 3528 RGB Strip Lights
Scannable Barcode for UPC 796391551275
Sellers
| Marketplace | Price | Updated |
|---|---|---|
| $5.99 | 03/31/2021 22:32:01 GMT - Details |
Recently Searched
UPC 744306797966
Led Strip Connector Kit, SMD 5050 4 Pin RGB LED Light Strip, 10mm Gapless Solderless Adapter, 2 Way Splitter Extension Cable RFAdapter for TV Backlights, Home Decoration, Light with Music Sync
Best Price: $13.99
View Product
UPC 600740430459
VIPMOON 20 Pack 4 Pin RGB 8mm Solderless Connector Adapter for SMD 2835 3528 Multicolor Non-Waterproof LED Strip Light
Best Price: $6.99
View Product
Attributes
| Attribute | Value |
|---|---|
| Brand | Walwee |
| Color | 2 Port Ir Remote |
| EAN | 0796391551275 |
| Manufacturer | Walwee |
| Model | WL2503-1 |
| UPC | 796391551275 |
Description
- Dual Output LED Controller Box: This controller box has 2 outputs 4-pin ports, you can connect 2 rolls of strip light at the same time. Compatible with 5050 2835 3528 RGB LED light strip
- Wireless 44 Key Remote Controller: There are 20 statics colors, Brightness increase and decrease are supported for single statics color; 8 Light Patterns: Quick / Slow / Auto / Flash / 3 color fade change / 7 color fade change / 3 color jumpy change / 7 color jumpy change
- How to Set DIY Color: Step 1: Press DIY1 button, it will enter DIY mode, then you can press arrows of Red Green and Blue to adjust the color that you want. After finishing the color adjustment, press DIY1 again, the setting has been completed and current color will be saved. Same way to set DIY2 to DIY6, all 6 DIY buttons are memorial design, once save the mode, you don't have to set again next time
- Remote Control Doesn't Work. Firstly, pull out the plastic cover on the buttom of remote before use. Then connect box output port with led strip . Finally, remote should be aimed at the ir receiver and without any obstacles
- Buttons Don't Control Correct Colors. First, you can press the remote control switch button , turn off the light strip. Then press the "FADE7" button in the lower right corner, the light strip will flash once. Then press the three keys R.G.B to adjust the color, press the switch button to turn on the light strip, the buttons can control the right color. If not, repeat the above steps until the button can control the correct color
Price Disclaimer
Product prices are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on amazon.com, amazonsupply.com, or myhabit.com at the time of purchase will apply to the purchase of this product.