UPC 798825028629

• COMPATIBILITY 7 fins Ninja Blade Apply to BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102
• PLEASE CHECK please check your existing blade for the following. 1: Count the FINS IT SHOULD BE 7-FINS. 2: The blade has MALE FINS 3) 4" Diameter.
• PACK 1x 7 Fins Bottom Blade Assembly, 1 x Replacement Gasket Rubber
• NOTE 1: The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade; 2: Be careful of the blade when open the package. 3: Not Fit BL660, BL 663, BL740, BL770, BL771, BL772, BL780, BL810, BL820, BL830, BL450, BL451-70, BL454-70, BL482-70 etc.
• GUARANTEE If you are buying before or after purchase any questions, please feel free to contact us, we'll issue you a full refund or replacement.

Item Type: Ninja Blender Replacement Parts for blender Two conditions must be met at the same time before purchase: Your original motor base must be 7 fins; Your blender model must identity with our stated model.This Ninja Blender Accessories Suit for: BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.Not fit for BL660, BL663, BL740, BL770, BL771, BL773CO, BL780, BL780, BL820, BL830, BL450, BL451-70, BL454-70, BL482-70. Please check your model carefully before purchasing.NOTE : The Ninja Replacement Blade can't fit all the 7 fins blender's motor base: there are too many models of ninja blender blade, if the last two digitals or any character is difference, please don't purchase it Pay attention to before use : Please check whether the gear of the bottom loosen or tighten before use. If it's loosen, please tighten it. Please check the rubber gasket and be sure it is put snugly into the bottom blade. Do not overfill! To avoid spilling, do not add ingredients past the Max fill line. Place the replacement blade onto the cup and screw it tightly until you have a good seal. Please make sure it in right place and locked tightly. Do not run your blender over 4 minutes at a time to prevent overheating of the blender. Packing including:1 x Ninja blade Replacement1 x Extra Gasket Rubber